Journal of Composite Materials

Journal: Journal of Composite Materials

Abbreviation

J. compos. mater.

Publisher

SAGE

ISSN

0021-9983
1530-793X

Show all metadata

Search Results

Publications 1 - 10 of 15

Fast method to monitor the flow front and control injection parameters in resin transfer molding using pressure sensors
Di Fratta, Claudio; Koutsoukis, Grigorios; Klunker, Florian; et al. (2016)
Journal of Composite Materials
Permeability and compaction behaviour of air-texturised glass fibre rovings: A characterisation study
Sandberg, Michael; Kabachi, Ayyoub; Volk, Maximilian; et al. (2020)
Journal of Composite Materials
Air-texturisation is a process that adds bulkiness to bundles of fibres. In this study, the permeability and compaction behaviour of air-texturised glass fibre rovings are experimentally characterised and compared to conventional unidirectional rovings. Based on radial impregnation experiments and single-step compaction/decompaction tests, the following main findings are highlighted: Compared to conventional unidirectional-rovings, the normalised permeability of the air-texturised rovings was approximately three times higher along the fibre direction and 40 times higher transverse to the fibre direction. Accordingly, the degree of anisotropy was approximately one magnitude lower. At a compaction pressure of 1 and 5 bar, the air-texturised rovings were compacted to a volume fraction of Vf=0.34 and 0.43, respectively, which was approximately 30% lower than the volume fraction achieved for the conventional unidirectional-rovings. Finally, it was observed that the decompaction of air-texturised rovings exhibits a more distinct elastic response when unloaded.
Thermal Phenomena in Fiber-reinforced Thermoplastic Tape Winding Process
Toso, Yves M.P.; Ermanni, Paolo; Poulikakos, Dimos (2004)
Journal of Composite Materials
Influence of fixation structures on the in plane permeability of unidirectional glass fiber tapes
Endruweit, A.; Ermanni, Paolo (2002)
Journal of Composite Materials
Mechanisms of hydrodynamically induced in plane deformation of reinforcement textiles in resin injection processes
Endruweit, A.; Gehrig, S.; Ermanni, Paolo (2003)
Journal of Composite Materials
Examination of Hashin’s failure criteria for Part B of the second world-wide failure exercise
Kress, G. (2013)
Journal of Composite Materials
Epoxy-Vermiculite Nanocomposites as Gas Permeation Barrier
Mittal, V. (2008)
Journal of Composite Materials
Fracture Behavior of GFRP Laminates with Nanocomposite Epoxy Resin Matrix
Barbezat, Michel; Brunner, A. J.; Necola, A.; et al. (2009)
Journal of Composite Materials
Examination of Hashin's failure criteria for the second world-wide failure exercise
Kress, Gerald (2012)
Journal of Composite Materials
Effect of locally deposited nanosilica particles on interlaminar fracture toughness of high glass-transition temperature epoxy carbon fiber-reinforced composites
Louis, Bryan M.; Klunker, Florian; Ermanni, Paolo (2019)
Journal of Composite Materials

Publications 1 - 10 of 15

Journal: Journal of Composite Materials

Abbreviation

Publisher

Journal Volumes

ISSN

Description

Filters

Search Results