Photonics

Journal: Photonics

Publisher

MDPI

Show all metadata

Search Results

Publications1 - 7 of 7

Dual-Section DFB-QCLs for Multi-Species Trace Gas Analysis
Süess, Martin J.; Hundt, P. Morten; Tuzson, Béla; et al. (2016)
Photonics
We report on the dynamic behavior of dual-wavelength distributed feedback (DFB) quantum cascade lasers (QCLs) in continuous wave and intermittent continuous wave operation. We investigate inherent etaloning effects based on spectrally resolved light-current-voltage (LIV) characterization and perform time-resolved spectral analysis of thermal chirping during long (>5 µs) current pulses. The theoretical aspects of the observed behavior are discussed using a combination of finite element method simulations and transfer matrix method calculations of dual-section DFB structures. Based on these results, we demonstrate how the internal etaloning can be minimized using anti-reflective (AR) coatings. Finally, the potential and benefits of these devices for high precision trace gas analysis are demonstrated using a laser absorption spectroscopic setup. Thereby, the atmospherically highly relevant compounds CO2 (including its major isotopologues), CO and N2O are simultaneously determined with a precision of 0.16 ppm, 0.22 ppb and 0.26 ppb, respectively, using a 1-s integration time and an optical path-length of 36 m. This creates exciting new opportunities in the development of compact, multi-species trace gas analyzers.
Electron Population Dynamics in Optically Pumped Asymmetric Coupled Ge/SiGe Quantum Wells: Experiment and Models
Ciano, Chiara; Virgilio, Michele; Bagolini, Luigi; et al. (2020)
Photonics
n-type doped Ge quantum wells with SiGe barriers represent a promising heterostructure system for the development of radiation emitters in the terahertz range such as electrically pumped quantum cascade lasers and optically pumped quantum fountain lasers. The nonpolar lattice of Ge and SiGe provides electron–phonon scattering rates that are one order of magnitude lower than polar GaAs. We have developed a self-consistent numerical energy-balance model based on a rate equation approach which includes inelastic and elastic inter- and intra-subband scattering events and takes into account a realistic two-dimensional electron gas distribution in all the subband states of the Ge/SiGe quantum wells by considering subband-dependent electronic temperatures and chemical potentials. This full-subband model is compared here to the standard discrete-energy-level model, in which the material parameters are limited to few input values (scattering rates and radiative cross sections). To provide an experimental case study, we have epitaxially grown samples consisting of two asymmetric coupled quantum wells forming a three-level system, which we optically pump with a free electron laser. The benchmark quantity selected for model testing purposes is the saturation intensity at the 1→3 intersubband transition. The numerical quantum model prediction is in reasonable agreement with the experiments and therefore outperforms the discrete-energy-level analytical model, of which the prediction of the saturation intensity is off by a factor 3.
Frequency Tuning and Modulation of a Quantum Cascade Laser with an Integrated Resistive Heater
Gürel, Kutan; Schilt, Stéphane; Bismuto, Alfredo; et al. (2016)
Photonics
We present a detailed experimental investigation of the use of a novel actuator for frequency tuning and modulation in a quantum cascade laser (QCL) based on a resistive integrated heater (IH) placed close to the active region. This new actuator is attractive for molecular spectroscopy applications as it enables fast tuning of the QCL wavelength with a minor influence on the optical output power, and is electrically-controlled. Using a spectroscopic setup comprising a low-pressure gas cell, we measured the tuning and modulation properties of a QCL emitting at 7.8 μm as a function of the active region and IH currents. We show that a current step applied to the IH enables the laser frequency to be switched by 500 MHz in a few milliseconds, as fast as for a step of the current in the active region, and limited by heat dissipation towards the laser sub-mount. The QCL optical frequency can be modulated up to ~100 kHz with the IH current, which is one order of magnitude slower than for the QCL current, but sufficient for many spectroscopic applications. We discuss the experimental results using a thermal model of the heat transfer in terms of cascaded low-pass filters and extract the respective cut-off frequencies. Finally, we present a proof-of-principle experiment of wavelength modulation spectroscopy of a N2O transition performed with a modulation of the IH current and show some potential benefits in comparison to QCL current modulation, which results from the reduced associated amplitude modulation.
Advanced Fabrication of Single-Mode and Multi-Wavelength MIR-QCLs
Faist, Jérôme; Süess, Martin J.; Peretti, Romain; et al. (2016)
Photonics
In this article we present our latest work on the optimization of mid-infrared quantum cascade laser fabrication techniques. Our efforts are focused on low dissipation devices, broad-area high-power photonic crystal lasers, as well as multi-wavelength devices realized either as arrays or multi-section distributed feedback (DFB) devices. We summarize our latest achievements and update them with our most recent results.
RF injection of THz QCL combs at 80 K emitting over 700 GHz spectral bandwidth
Forrer, Andres; Bosco, Lorenzo; Beck, Mattias; et al. (2020)
Photonics
We report about RF injection locking of an homogeneous THz quantum cascade laser operating at 3 THz central frequency. The extremely diagonal nature of the optical transition, combined with low-loss copper-based double-metal waveguides, allow CW operation up to 105 K and CW power in excess of 5.6 mW measured at 80 K. Terahertz emission spanning up to 600 GHz, together with a narrow beatnote, indicate comb operation at 80 K, and strong RF injection clearly modifies the laser spectrum up to 700 GHz spectral bandwidth making these devices ideal candidates for an on-chip dual comb spectrometer.
Optoacoustic calcium imaging of deep brain activity in an intracardially perfused mouse brain model
Degtyaruk, Oleksiy; Mc Larney, Benedict; Dean-Ben, Xose Luis; et al. (2019)
Photonics
One main limitation of established neuroimaging methods is the inability to directly visualize large-scale neural dynamics in whole mammalian brains at subsecond speeds. Optoacoustic imaging has advanced in recent years to provide unique advantages for real-time deep-tissue observations, which have been exploited for three-dimensional imaging of both cerebral hemodynamic parameters and direct calcium activity in rodents. Due to a lack of suitable calcium indicators excitable in the near-infrared window, optoacoustic imaging of neuronal activity at deep-seated areas of the mammalian brain has been impeded by the strong absorption of blood in the visible range of the light spectrum. To overcome this, we have developed and validated an intracardially perfused mouse brain preparation labelled with genetically encoded calcium indicator GCaMP6f that closely resembles in vivo conditions. By overcoming the limitations of hemoglobin-based light absorption, this new technique was used to observe stimulus-evoked calcium dynamics in the brain at penetration depths and spatio-temporal resolution scales not attainable with existing neuroimaging techniques.
High-Power, Narrow-Linewidth Distributed-Feedback Quantum-Cascade Laser for Molecular Spectroscopy
Bertrand, Mathieu; Shlykov, Aleksandr; Shahmohamadi, Mehran; et al. (2022)
Photonics
Quantum cascade lasers are versatile light sources in the mid-infrared range for molecular spectroscopy which find a wide range of applications from high-resolution studies to sensing. While devices with either high power or narrow spectral linewidth have previously been reported, there is still a lack of sources combining both of these characteristics which are particularly important for precision measurements of weak spectroscopic transitions. In this article, we describe and characterize a novel master-oscillator power-amplifier distributed-feedback quantum cascade laser designed to fill this gap. At an output power of 300 mW, the device features a free-running linewidth of 1.3 MHz, measured with a frequency discriminator technique, at an emission wavenumber of 2185 cm(-1). This linewidth is sufficiently narrow to enable a further reduction by a tight lock to a high-Q oscillator.

Publications1 - 7 of 7

Journal: Photonics

Abbreviation

Publisher

Journal Volumes

ISSN

Description

Filters

Search Results