Remote Sensing

Journal: Remote Sensing

Abbreviation

Remote Sens.

Publisher

MDPI

ISSN

2072-4292

Show all metadata

Search Results

Publications 1 - 10 of 119

Erratum: A Machine Learning Method for Co-Registration and Individual Tree Matching of Forest Inventory and Airborne Laser Scanning Data. Remote Sens. 2017, 9, 505
Lamprecht, Sebastian; Hill, Andreas; Stoffels, Johannes; et al. (2017)
Remote Sensing
Accuracy assessment of digital surface models from Unmanned Aerial Vehicles' imagery on glaciers
Gindraux, Saskia; Boesch, Ruedi; Farinotti, Daniel (2017)
Remote Sensing
The use of Unmanned Aerial Vehicles (UAV) for photogrammetric surveying has recently gained enormous popularity. Images taken from UAVs are used for generating Digital Surface Models (DSMs) and orthorectified images. In the glaciological context, these can serve for quantifying ice volume change or glacier motion. This study focuses on the accuracy of UAV-derived DSMs. In particular, we analyze the influence of the number and disposition of Ground Control Points (GCPs) needed for georeferencing the derived products. A total of 1321 different DSMs were generated from eight surveys distributed on three glaciers in the Swiss Alps during winter, summer and autumn. The vertical and horizontal accuracy was assessed by cross-validation with thousands of validation points measured with a Global Positioning System. Our results show that the accuracy increases asymptotically with increasing number of GCPs until a certain density of GCPs is reached. We call this the optimal GCP density. The results indicate that DSMs built with this optimal GCP density have a vertical (horizontal) accuracy ranging between 0.10 and 0.25 m (0.03 and 0.09 m) across all datasets. In addition, the impact of the GCP distribution on the DSM accuracy was investigated. The local accuracy of a DSM decreases when increasing the distance to the closest GCP, typically at a rate of 0.09 m per 100-m distance. The impact of the glacier’s surface texture (ice or snow) was also addressed. The results show that besides cases with a surface covered by fresh snow, the surface texture does not significantly influence the DSM accuracy.
Geometric Quality Analysis of AVHRR Orthoimages
Kocaman-Aksakal, Sultan; Neuhaus, Christoph; Baltsavias, Emmanuel; et al. (2015)
Remote Sensing
The geometric accuracy of 2008 AVHRR orthoimages from Metop-A, NOAA-17 and NOAA-18 satellites over Switzerland have been investigated here. The methods employed in the study are fully automated, with an accuracy of 0.1–0.2 pixels, however, blunders do occur and this requests a careful blunder detection approach. The investigations include analysis of relative, absolute and band-to-band registration (BBR) accuracy. Regarding relative accuracy, thousands of points are matched between Metop-A, NOAA-17 and NOAA-18 images of the same day. The accuracy is quite high with mean shifts between 0.2 and 0.4 pixels. Systematic stripes have been observed when NOAA-18 images are involved in matching. In spite of many efforts to find the source of this error, no explanation could be found. In addition, large shifts up to 2.9 pixels on some days between September and December 2008 were observed. Regarding absolute accuracy, digitized lakes as reference polygons have been used and a subpixel lake matching method has been applied. The mean shifts generally fulfilled EUMETSAT and GCOS specifications, although some partial results exceed them, especially for Metop-A. Regarding BBR accuracy, six multispectral bands have been compared, also with point matching. The EUMETSAT specification is 0.1 km, however, this specification refers to original images, not orthoimages. Taking also into account the matching errors of 0.1 km, the EUMETSAT specifications are in principle fulfilled in all cases except matching of Metop-A and NOAA-17 Band-2 images with Bands 4 and 5. The overall work showed that although, in general, accuracies are high and fulfill specifications, errors exceeding the specifications can occur and vary depending on the satellite used, time and location. Such errors influence subsequent geometric or thematic processing; thus, an automated and permanent quality control of such images should be executed.
Modeling the Differences between Ultra-Rapid and Final Orbit Products of GPS Satellites Using Machine-Learning Approaches
Gou, Junyang; Rösch, Christine; Shehaj, Endrit; et al. (2023)
Remote Sensing
The International GNSS Service analysis centers provide orbit products of GPS satellites with weekly, daily, and sub-daily latency. The most frequent ultra-rapid products, which include 24 h of orbits derived from observations and 24 h of orbit predictions, are vital for real-time applications. However, the predicted part of the ultra-rapid orbits is less accurate than the estimated part and has deviations of several decimeters with respect to the final products. In this study, we investigate the potential of applying machine-learning (ML) and deep-learning (DL) algorithms to further enhance physics-based orbit predictions. We employed multiple ML/DL algorithms and comprehensively compared the performances of different models. Since the prediction errors of the physics-based propagators accumulate with time and have sequential characteristics, specific sequential modeling algorithms, such as Long Short-Term Memory (LSTM), show superiority. Our approach shows promising results with average improvements of 47% in 3D RMS within the 24-h prediction interval of the ultra-rapid products. In the end, we applied the orbit predictions improved by LSTM to kinematic precise point positioning and demonstrated the benefits of LSTM-improved orbit predictions for positioning applications. The accuracy of the station coordinates estimated based on these products is improved by 16% on average compared to those using ultra-rapid orbit predictions.
Site Selection via Learning Graph Convolutional Neural Networks: A Case Study of Singapore
Lan, Tian; Cheng, Hao; Wang, Yi; et al. (2022)
Remote Sensing
Selection of store sites is a common but challenging task in business practices. Picking the most desirable location for a future store is crucial for attracting customers and becoming profitable. The classic multi-criteria decision-making framework for store site selection oversimplifies the local characteristics that are both high dimensional and unstructured. Recent advances in deep learning enable more powerful data-driven approaches for site selection, many of which, however, overlook the interaction between different locations on the map. To better incorporate the spatial interaction patterns in understanding neighborhood characteristics and their impact on store placement, we propose to learn a graph convolutional network (GCN) for highly effective site selection tasks. Furthermore, we present a novel dataset that encompasses land use information as well as public transport networks in Singapore as a case study to benchmark site selection algorithms. It allows us to construct a geospatial GCN based on the public transport system to predict the attractiveness of different store sites within neighborhoods. We show that the proposed GCN model outperforms the competing methods that are learning from local geographical characteristics only. The proposed case study corroborates the geospatial interactions and offers new insights for solving various geographic and transport problems using graph neural networks.
Sen2Like: Paving the Way towards Harmonization and Fusion of Optical Data
Saunier, Sebastien; Pflug, Bringfried; Lobos, Italo Moletto; et al. (2022)
Remote Sensing
Satellite Earth Observation (EO) sensors are becoming a vital source of information for land surface monitoring. The concept of the Virtual Constellation (VC) is gaining interest within the science community owing to the increasing number of satellites/sensors in operation with similar characteristics. The establishment of a VC out of individual missions offers new possibilities for many application domains, in particular in the fields of land surface monitoring and change detection. In this context, this paper describes the Copernicus Sen2Like algorithms and software, a solution for harmonizing and fusing Landsat 8/Landsat 9 data with Sentinel-2 data. Developed under the European Union Copernicus Program, the Sen2Like software processes a large collection of Level 1/Level 2A products and generates high quality Level 2 Analysis Ready Data (ARD) as part of harmonized (Level 2H) and/or fused (Level 2F) products providing high temporal resolutions. For this purpose, we have re-used and developed a broad spectrum of data processing and analysis methodologies, including geometric and spectral co-registration, atmospheric and Bi-Directional Reflectance Distribution Function (BRDF) corrections and upscaling to 10 m for relevant Landsat bands. The Sen2Like software and the algorithms have been developed within a VC establishment framework, and the tool can conveniently be used to compare processing algorithms in combinations. It also has the potential to integrate new missions from spaceborne and airborne platforms including unmanned aerial vehicles. The validation activities show that the proposed approach improves the temporal consistency of the multi temporal data stack, and output products are interoperable with the subsequent thematic analysis processes.
WeedMap: A large-scale semantic weed mapping framework using aerial multispectral imaging and deep neural network for precision farming
Sa, Inkyu; Popović, Marija; Khanna, Raghav; et al. (2018)
Remote Sensing
The ability to automatically monitor agricultural fields is an important capability in precision farming, enabling steps towards more sustainable agriculture. Precise, high-resolution monitoring is a key prerequisite for targeted intervention and the selective application of agro-chemicals. The main goal of this paper is developing a novel crop/weed segmentation and mapping framework that processes multispectral images obtained from an unmanned aerial vehicle (UAV) using a deep neural network (DNN). Most studies on crop/weed semantic segmentation only consider single images for processing and classification. Images taken by UAVs often cover only a few hundred square meters with either color only or color and near-infrared (NIR) channels. Although a map can be generated by processing single segmented images incrementally, this requires additional complex information fusion techniques which struggle to handle high fidelity maps due to their computational costs and problems in ensuring global consistency. Moreover, computing a single large and accurate vegetation map (e.g., crop/weed) using a DNN is non-trivial due to difficulties arising from: (1) limited ground sample distances (GSDs) in high-altitude datasets, (2) sacrificed resolution resulting from downsampling high-fidelity images, and (3) multispectral image alignment. To address these issues, we adopt a stand sliding window approach that operates on only small portions of multispectral orthomosaic maps (tiles), which are channel-wise aligned and calibrated radiometrically across the entire map. We define the tile size to be the same as that of the DNN input to avoid resolution loss. Compared to our baseline model (i.e., SegNet with 3 channel RGB (red, green, and blue) inputs) yielding an area under the curve (AUC) of [background=0.607, crop=0.681, weed=0.576], our proposed model with 9 input channels achieves [0.839, 0.863, 0.782]. Additionally, we provide an extensive analysis of 20 trained models, both qualitatively and quantitatively, in order to evaluate the effects of varying input channels and tunable network hyperparameters. Furthermore, we release a large sugar beet/weed aerial dataset with expertly guided annotations for further research in the fields of remote sensing, precision agriculture, and agricultural robotics.
Satellite-based rainfall retrieval: From generalized linear models to artificial neural networks
Beusch, Lea; Foresti, Loris; Gabella, Marco; et al. (2018)
Remote Sensing
In this study, we develop and compare satellite rainfall retrievals based on generalized linear models and artificial neural networks. Both approaches are used in classification mode in a first step to identify the precipitating areas (precipitation detection) and in regression mode in a second step to estimate the rainfall intensity at the ground (rain rate). The input predictors are geostationary satellite infrared (IR) brightness temperatures and Satellite Application Facility (SAF) nowcasting products which consist of cloud properties, such as cloud top height and cloud type. Additionally, a set of auxiliary location-describing input variables is employed. The output predictand is the ground-based instantaneous rain rate provided by the European-scale radar composite OPERA, that was additionally quality-controlled. We compare our results to a precipitation product which uses a single infrared (IR) channel for the rainfall retrieval. Specifically, we choose the operational PR-OBS-3 hydrology SAF product as a representative example for this type of approach. With generalized linear models, we show that we are able to substantially improve in terms of hits by considering more IR channels and cloud property predictors. Furthermore, we demonstrate the added value of using artificial neural networks to further improve prediction skill by additionally reducing false alarms. In the rain rate estimation, the indirect relationship between surface rain rates and the cloud properties measurable with geostationary satellites limit the skill of all models, which leads to smooth predictions close to the mean rainfall intensity. Probability matching is explored as a tool to recover higher order statistics to obtain a more realistic rain rate distribution.
Mapping Landslides on EO Data: Performance of Deep Learning Models vs. Traditional Machine Learning Models
Prakash, Nikhil; Manconi, Andrea; Loew, Simon (2020)
Remote Sensing
Mapping landslides using automated methods is a challenging task, which is still largely done using human efforts. Today, the availability of high-resolution EO data products is increasing exponentially, and one of the targets is to exploit this data source for the rapid generation of landslide inventory. Conventional methods like pixel-based and object-based machine learning strategies have been studied extensively in the last decade. In addition, recent advances in CNN (convolutional neural network), a type of deep-learning method, has been widely successful in extracting information from images and have outperformed other conventional learning methods. In the last few years, there have been only a few attempts to adapt CNN for landslide mapping. In this study, we introduce a modified U-Net model for semantic segmentation of landslides at a regional scale from EO data using ResNet34 blocks for feature extraction. We also compare this with conventional pixel-based and object-based methods. The experiment was done in Douglas County, a study area selected in the south of Portland in Oregon, USA, and landslide inventory extracted from SLIDO (Statewide Landslide Information Database of Oregon) was considered as the ground truth. Landslide mapping is an imbalanced learning problem with very limited availability of training data. Our network was trained on a combination of focal Tversky loss and cross-entropy loss functions using augmented image tiles sampled from a selected training area. The deep-learning method was observed to have a better performance than the conventional methods with an MCC (Matthews correlation coefficient) score of 0.495 and a POD (probability of detection) rate of 0.72 .
Validation of CM SAF CLARA-A2 and SARAH-E surface solar radiation datasets over China
Wang, Yawen; Trentmann, Jörg; Yuan, Wenping; et al. (2018)
Remote Sensing
To achieve high-quality surface solar radiation (SSR) data for climate monitoring and analysis, the two satellite-derived monthly SSR datasets of CM SAF CLARA-A2 and SARAH-E have been validated against a homogenized ground-based dataset covering 59 stations across China for 1993–2015 and 1999–2015, respectively. The satellite products overestimate surface solar irradiance by 10.0 W m−2 in CLARA-A2 and 7.5 W m−2 in SARAH-E on average. A strong urbanization effect has been noted behind the large positive bias in China. The bias decreased after 2004, possibly linked to a weakened attenuating effect of aerosols on radiation in China. Both satellite datasets can reproduce the monthly anomalies of SSR, indicated by a significant correlation around 0.8. Due to the neglection of temporal aerosol variability in the satellite algorithms, the discrepancy between the satellite-estimated and ground-observed SSR trends slightly increases in 1999–2015 as compared to 1993–2015. The seasonal performance of the satellite products shows a better accuracy during warm than cold seasons. With respect to the spatial performance, the effects from anthropogenic aerosols, dust aerosols and high elevation and snow-covered surfaces should be well considered in the satellite SSR retrievals to further improve the performance in the eastern, northwestern and southwestern parts of China, respectively.

Publications 1 - 10 of 119

Journal: Remote Sensing

Abbreviation

Publisher

Journal Volumes

ISSN

Description

Filters

Search Results