Journal: Plants
Loading...
Abbreviation
Publisher
MDPI
16 results
Search Results
Publications 1 - 10 of 16
- FLOWERING LOCUS T Triggers Early and Fertile Flowering in Glasshouse Cassava (Manihot esculenta Crantz)Item type: Other Journal Item
PlantsBull, Simon; Alder, Adrian; Barsan, Cristina; et al. (2017)Accelerated breeding of plant species has the potential to help challenge environmental and biochemical cues to support global crop security. We demonstrate the over-expression of Arabidopsis FLOWERING LOCUS T in Agrobacterium-mediated transformed cassava (Manihot esculenta Crantz; cultivar 60444) to trigger early flowering in glasshouse-grown plants. An event seldom seen in a glasshouse environment, precocious flowering and mature inflorescence were obtained within 4–5 months from planting of stem cuttings. Manual pollination using pistillate and staminate flowers from clonal propagants gave rise to viable seeds that germinated into morphologically typical progeny. This strategy comes at a time when accelerated crop breeding is of increasing importance to complement progressive genome editing techniques. - Expression of Cry1Ab/2Aj Protein in Genetically Engineered Maize Plants and Its Transfer in the Arthropod Food WebItem type: Journal Article
PlantsChen, Yi; Meissle, Michael; Xue, Jiabao; et al. (2023)While transgenic Bacillus thuringiensis (Bt) maize provides pest resistance and a reduced application of chemical pesticides, a comprehensive environmental risk assessment is mandatory before its field release. This research determined the concentrations of Bt protein in plant tissue and in arthropods under field conditions in Gongzhuling City, northeastern China, to provide guidance for the selection of indicator species for non-target risk assessment studies. Bt maize expressing Cry1Ab/2Aj and non-transformed near-isoline were grown under identical environmental and agricultural conditions. Cry1Ab/2Aj was detected in plant tissues and arthropods collected from Bt maize plots during pre-flowering, flowering, and post-flowering. The expression of Cry1Ab/2Aj varied across growth stages and maize tissues, as well as in the collected arthropods at the three growth stages. Therefore, representative species should be chosen to cover the whole growing season and to represent different habitats and ecological functions. Dalbulus maidis (Hemiptera: Cicadellidae), Rhopalosiphum padi (Hemiptera: Aphididae), Heteronychus arator (Coleoptera: Scarabaeidae), and Somaticus angulatus (Coleoptera: Tenebrionidae) are suitable non-target herbivores. Propylea japonica (Coleoptera: Coccinellidae), Paederus fuscipes (Coleoptera: Staphylinidae), Chrysoperla nipponensis (Neuroptera: Chrysopidae), and spiders are suggested predators. Apis cerana and Apis mellifera ligustica (both Hymenoptera: Apidae) represent pollinators and Folsomia candida (Collembola: Isotomidae) decomposers. - Environmental Signals Act as a Driving Force for Metabolic and Defense Responses in the Antarctic Plant Colobanthus quitensisItem type: Journal Article
PlantsBertini, Laura; Proietti, Silvia; Fongaro, Benedetta; et al. (2022)During evolution, plants have faced countless stresses of both biotic and abiotic nature developing very effective mechanisms able to perceive and counteract adverse signals. The biggest challenge is the ability to fine-tune the trade-off between plant growth and stress resistance. The Antarctic plant Colobanthus quitensis has managed to survive the adverse environmental conditions of the white continent and can be considered a wonderful example of adaptation to prohibitive conditions for millions of other plant species. Due to the progressive environmental change that the Antarctic Peninsula has undergone over time, a more comprehensive overview of the metabolic features of C. quitensis becomes particularly interesting to assess its ability to respond to environmental stresses. To this end, a differential proteomic approach was used to study the response of C. quitensis to different environmental cues. Many differentially expressed proteins were identified highlighting the rewiring of metabolic pathways as well as defense responses. Finally, a different modulation of oxidative stress response between different environmental sites was observed. The data collected in this paper add knowledge on the impact of environmental stimuli on plant metabolism and stress response by providing useful information on the trade-off between plant growth and defense mechanisms. - Determination of Major, Minor and Chiral Components as Quality and Authenticity Markers of Rosa damascena Oil by GC-FIDItem type: Journal Article
PlantsRaeber, Justine; Favrod, Sina; Steuer, Christian (2023)Rose oil is traditionally produced by the water distillation of Rosa damascena and is of high economic value due to the low essential oil yield. It is therefore a common target for adulteration, which can cause harm to consumers. Current standards for authenticity control only consider the analysis of major components and overlook minor quality markers as well as the enantiomeric ratio of terpenes, which have proven useful in originality determination. The aim of this study was the development of two analytical GC-FID methods for the analysis of 21 and 29 rose oil analytes including major, minor and chiral components on a DB-wax and BGB 178 30% CD (chiral) capillary column, respectively. The total run time for both methods was within 60 min. For all target analytes, the % bias at the lower and upper calibration range varied from −7.8 to 13.2% and −13.1 to 5.2% analysed on the DB-wax column and 0.5 to 13.3% and −6.9 to 7.0% analysed on the chiral column. The chiral analysis successfully separated the enantiomers (+/−)-camphene, (+/−)-rose oxide, (+/−)-linalool, (+/−)-citronellol and (+/−)-citronellyl acetate, as well as the diastereomers of citral and β-damascenone. Both methods were applied to the analysis of 10 authentic rose oil samples and the enantiomeric/diastereomeric ratios, as well as the content of major and minor components, were determined. The identity of the analysed components in the authentic samples was further confirmed by GC-MS. - A Metabolome Analysis and the Immunity of Phlomis purpurea against Phytophthora cinnamomiItem type: Journal Article
PlantsNeves, Dina; Figueiredo, Andreia; Maia, Marisa; et al. (2023)Phlomis purpurea grows spontaneously in the southern Iberian Peninsula, namely in cork oak (Quercus suber) forests. In a previous transcriptome analysis, we reported on its immunity against Phytophthora cinnamomi. However, little is known about the involvement of secondary metabolites in the P. purpurea defense response. It is known, though, that root exudates are toxic to this pathogen. To understand the involvement of secondary metabolites in the defense of P. purpurea, a metabolome analysis was performed using the leaves and roots of plants challenged with the pathogen for over 72 h. The putatively identified compounds were constitutively produced. Alkaloids, fatty acids, flavonoids, glucosinolates, polyketides, prenol lipids, phenylpropanoids, sterols, and terpenoids were differentially produced in these leaves and roots along the experiment timescale. It must be emphasized that the constitutive production of taurine in leaves and its increase soon after challenging suggests its role in P. purpurea immunity against the stress imposed by the oomycete. The rapid increase in secondary metabolite production by this plant species accounts for a concerted action of multiple compounds and genes on the innate protection of Phlomis purpurea against Phytophthora cinnamomi. The combination of the metabolome with the transcriptome data previously disclosed confirms the mentioned innate immunity of this plant against a devastating pathogen. It suggests its potential as an antagonist in phytopathogens’ biological control. Its application in green forestry/agriculture is therefore possible. - Two Is Company, but Four Is a Party—Challenges of Tetraploidization for Cell Wall Dynamics and Efficient Tip-Growth in PollenItem type: Review Article
PlantsWestermann, Jens (2021)Some cells grow by an intricately coordinated process called tip-growth, which allows the formation of long tubular structures by a remarkable increase in cell surface-to-volume ratio and cell expansion across vast distances. On a broad evolutionary scale, tip-growth has been extraordinarily successful, as indicated by its recurrent ‘re-discovery’ throughout evolutionary time in all major land plant taxa which allowed for the functional diversification of tip-growing cell types across gametophytic and sporophytic life-phases. All major land plant lineages have experienced (recurrent) polyploidization events and subsequent re-diploidization that may have positively contributed to plant adaptive evolutionary processes. How individual cells respond to genome-doubling on a shorter evolutionary scale has not been addressed as elaborately. Nevertheless, it is clear that when polyploids first form, they face numerous important challenges that must be overcome for lineages to persist. Evidence in the literature suggests that tip-growth is one of those processes. Here, I discuss the literature to present hypotheses about how polyploidization events may challenge efficient tip-growth and strategies which may overcome them: I first review the complex and multi-layered processes by which tip-growing cells maintain their cell wall integrity and steady growth. I will then discuss how they may be affected by the cellular changes that accompany genome-doubling. Finally, I will depict possible mechanisms polyploid plants may evolve to compensate for the effects caused by genome-doubling to regain diploid-like growth, particularly focusing on cell wall dynamics and the subcellular machinery they are controlled by. - Screening for resistance in farmer-preferred cassava cultivars from ghana to a mixed infection of cbsv and ucbsvItem type: Journal Article
PlantsElegba, Wilfred; Gruissem, Wilhelm; Vanderschuren, Hervé (2020)Cassava brown streak disease (CBSD) caused by the Cassava brown streak virus (CBSV) and Ugandan cassava brown streak virus (UCBSV) is a threat to cassava production in Africa. The potential spread of CBSD into West Africa is a cause for concern, therefore screening for resistance in farmer-preferred genotypes is crucial for effective control and management. We multiplied a selection of eleven cassava cultivars grown by farmers in Ghana to test their response to a mixed infection of CBSV (TAZ-DES-01) and UCBSV (TAZ-DES-02) isolates using a stringent top-cleft graft inoculation method. Virus titers were quantified in the inoculated scions and cuttings propagated from the inoculated scions to assess virus accumulation and recovery. All cultivars were susceptible to the mixed infection although their response and symptom development varied. In the propagated infected scions, CBSV accumulated at higher titers in leaves of eight of the eleven cultivars. Visual scoring of storage roots from six-month-old virus-inoculated plants revealed the absence of CBSD-associated necrosis symptoms and detectable titers of CBSVs in the cultivar, IFAD. Although all eleven cultivars supported the replication of CBSV and UCBSV in their leaves, the absence of virus replication and CBSD-associated symptoms in the roots of some cultivars could be used as criteria to rapidly advance durable CBSD tolerance using breeding and genetic engineering approaches. - Metal Accumulation and Biomass Production in Young Afforestations Established on Soil Contaminated by Heavy MetalsItem type: Journal Article
PlantsGünthardt-Goerg, Madeleine Silvia; Vollenweider, Pierre; Schulin, Rainer (2022)The restoration of forest ecosystems on metal-contaminated sites can be achieved whilst produc-ing valuable plant biomass. Here, we investigated the metal accumulation and biomass production of young afforestations on contaminated plots by simulating brownfield site conditions. On 16 3-m2 plots, the 15 cm topsoil was experimentally contaminated with Zn/Cu/Pb/Cd = 2854/588/103/9.2 mg kg−1 using smelter filter dust, while 16 uncontaminated plots (Zn/Cu/Pb/Cd = 97/28/37/< 1) were used as controls. Both the calcareous (pH 7.4) and acidic (pH 4.2) subsoils remained uncontaminated. The afforestations consisted of groups of conifers, deciduous trees, and understorey plants. During the four years of cultivation, 2254/86/0.35/10 mg m−2 Zn/Cu/Pb/Cd were extracted from the contaminated soils and transferred to the aboveground parts of the plants (1279/72/0.06/5.5 mg m−2 in the controls). These extractions represented 3/2/3% of the soluble soil Zn/Cu/Cd fractions. The conifers showed 4–8 times lower root-to-shoot translocation of Cu and Zn than the deciduous trees. The contamination did not affect the biomass of the understorey plants and reduced that of the trees by 23% at most. Hence, we conclude that the afforestation of brown field sites with local tree species is an interesting option for their reclamation from an ecological as well as economic perspective. - Measuring the Mechanical Properties of Plant Cell WallsItem type: Review Article
PlantsVogler, Hannes; Felekis, Dimitrios; Nelson, Bradley; et al. (2015)The size, shape and stability of a plant depend on the flexibility and integrity of its cell walls, which, at the same time, need to allow cell expansion for growth, while maintaining mechanical stability. Biomechanical studies largely vanished from the focus of plant science with the rapid progress of genetics and molecular biology since the mid-twentieth century. However, the development of more sensitive measurement tools renewed the interest in plant biomechanics in recent years, not only to understand the fundamental concepts of growth and morphogenesis, but also with regard to economically important areas in agriculture, forestry and the paper industry. Recent advances have clearly demonstrated that mechanical forces play a crucial role in cell and organ morphogenesis, which ultimately define plant morphology. In this article, we will briefly review the available methods to determine the mechanical properties of cell walls, such as atomic force microscopy (AFM) and microindentation assays, and discuss their advantages and disadvantages. But we will focus on a novel methodological approach, called cellular force microscopy (CFM), and its automated successor, real-time CFM (RT-CFM). - Callus Induction from Diverse Explants and Genotypes Enables Robust Transformation of Perennial Ryegrass (Lolium perenne L.)Item type: Journal Article
PlantsGrogg, Daniel; Rohner, Marius; Yates, Steven; et al. (2022)Genetic transformation of perennial ryegrass (Lolium perenne L.) is critical for fundamental and translational research in this important grass species. It often relies on Agrobacterium-mediated transformation of callus tissue. However, callus induction is restricted to a few genotypes that respond well to tissue culture. Here, we report callus induction from different perennial ryegrass genotypes and explants, such as shoot tips, seeds, and anthers, which were transformed with several plasmids for functional genomics. beta-glucuronidase (GUS) histochemical staining showed the LmdsRNAbp promoter sequence was active in stigmas, spikelets, anthers, and leaves. We also transformed calli with plasmids allowing gene silencing and gene knock-out using RNA interference and CRISPR/Cas9, respectively, for which genotypic and phenotypic investigations are ongoing. Using 19 different constructs, 262 transgenic events were regenerated. Moreover, the protocol regenerated a doubled haploid transgenic event from anther-derived calli. This work provides a proof-of-concept method for expanding the range of genotypes amenable to transformation, thus, serving research and breeding initiatives to improve this important grass crop for forage and recreation.
Publications 1 - 10 of 16