Journal: VAW-Mitteilungen

Abbreviation

Publisher

Eigenverlag der Versuchsanstalt für Wasserbau, Hydrologie und Glaziologie (VAW), ETH Zürich

Journal Volumes

ISSN

0374-0056

Description

Filters

Reset filters

Search Results

Publications 1 - 10 of 133
  • Festkolloquium WHH
    Item type: Conference Proceedings
    (2011)
    VAW-Mitteilungen
  • Current sedimentation research at VAW
    Item type: Conference Paper
    Albayrak, Ismail; Boes, Robert (2015)
    VAW-Mitteilungen ~ First International Workshop on Sediment Bypass Tunnels
  • Landslide-generated Impulse Waves in Reservoirs
    Item type: Journal Issue
    Evers, Frederic M.; Heller, Valentin; Fuchs, Helge; et al. (2019)
    VAW-Mitteilungen
    Landslide-generated impulse waves are typically caused by landslides, rockfalls, shore instabilities, snow avalanches or glacier calvings in oceans, bays, lakes or reservoirs. They are particularly relevant for the Alpine environment because of steep valley sides, possible large slide masses and impact velocities and the great number of reservoirs. In this manual, a state-of-the-art on the impulse wave generation and its effects on dams are presented including a computational procedure. Based on this method, engineers or natural scientists may predict the hazards originating from impulse waves efficiently and economically. The 1st edition of this manual was published in 2009. This 2nd edition includes both updates of existing and new computational approaches for additional hydraulic processes. The introduction in Chapter 1 contains background information on the topic and compares the available methods dealing with landslide-generated impulse waves. The method presented in this manual is based on generally applicable equations derived from hydraulic model tests. Chapter 2 introduces basic principles of the water wave theory. The computational procedure is presented in Chapter 3 and shown in Figure 3-1. It is based on the findings of impulse wave generation and its effects on dams. The computational procedure (Figure 3-1) includes two steps: in Step 1 the generally applicable equations are applied according to Chapter 3, whereas in Step 2 the effects not contained in Step 1 such as the effective instead of the idealised reservoir geometry are considered according to Chapter 4. In Step 1, the mass movement is modelled as a granular slide. To analyse the effect of impulse waves on dams, the wave height, amplitude, period and length are important. These are computed with the equations of Heller and Hager (2010) and Evers et al. (2019) as a function of the slide parameters. Two extreme cases for estimating the wave parameters are considered: (a) laterally constricted (2D) and (b) free radial propagation of the impulse waves (3D). The wave generation in both (a) and (b) depend on the identical parameters, whereas these for the wave propagation are not identical. Once the necessary wave parameters in front of the dam are determined, the run-up height and the overtopping volume may be computed according to Evers and Boes (2019) and Kobel et al. (2017), respectively. Potential overland flow on horizontal shorelines is covered by the equations of Fuchs and Hager (2015). The force effects on dams are computed using the method of Ramsden (1996). This method is first applied as if the dam would be vertical since the horizontal force component is independent from the dam inclination. The additional vertical force component for inclined dams is then computed assuming static wave pressure. If an impulse wave partially overtops a dam, only a partial water pressure has to be considered resulting in a reduction method. Once the results from Step 1 are available, the effects of the geometrical differences to the idealised extreme cases (a) and (b) have to be quantified in Step 2 according to Chapter 4. These differences may result from the prototype reservoir geometry differing from the idealised 2D or 3D geometries, or by the non-granular mass characteristics. The impulse wave parameters may considerably differ due to these effects. The presented method of Ruffini et al. (2019) allows for impulse wave height estimation in intermediate reservoir geometries between 2D and 3D. Approaches for the assessment of edge wave propagation along the shoreline perpendicular to the slide impact direction include equations of Heller and Spinneken (2015) and McFall and Fritz (2017). Moreover, the extent of underwater landslide deposits is covered by the equations of Fuchs et al. (2013). Step 2 is also required if the computational tool is applied, because these include only the generally applicable equations from Step 1. Finally, Sections 4.6 and 4.7 contain a sensitivity analysis and some reservoir safety aspects. Chapter 5 includes four computation examples and the application instructions for the computational tool. In Chapter 6 the conclusions are presented. Although the computational results, such as the run-up height, seem to be exact, it should be kept in mind that the present method results in estimations. Safety allowances for all planned actions have to be considered. Predictions that are more exact may emerge from a prototype-specific model test or numerical simulations.
  • Unsicherheiten bei der Modellierung von Erddammbrüchen und deren Auswirkung auf die Flutwellenberechnung
    Item type: Conference Paper
    Peter, Samuel J.; Siviglia, Annunziato; Boes, Robert (2014)
    VAW-Mitteilungen ~ Internationales Symposium, Wasser- und Flussbau im Alpenraum: 25.–27. Juni 2014 in Zürich: Band 2: Naturgefahren
  • Hochwasserschutz Sihl, Zürichsee, Limmat, Auslaufbauwerk Entlastungsstollen Thalwil
    Item type: Conference Paper
    Schroeder, Alice; Billeter, Peter; Boes, Robert; et al. (2021)
    VAW-Mitteilungen ~ Wasserbau-Symposium 2021, Wasserbau in Zeiten von Energiewende, Gewässerschutz und Klimawandel. Band 2: Hochwasserschutz Sihl, Zürichsee, Limmat; Wasserbauliches Versuchswesen und Messtechnik; Fischökologie; Flussmorphologie
  • Die Bedeutung der rheologischen Parameter bei der Murgangsimulation mit dem Programm Flo-2d
    Item type: Conference Paper
    Schatzmann, Markus (2004)
    VAW-Mitteilungen ~ Turbulenzen in der Geomorphologie
  • Aerated Flows in Low-Level Outlets with Varying Geometry and Roughness
    Item type: Monograph
    Pagliara, Simone (2025)
    VAW-Mitteilungen
    Reservoir dams play a crucial role in modern society, supporting hydropower production, irrigation, water supply, and flood protection. Low-level outlets (LLO) are key safety elements of large dams, allowing fast reservoir drawdown during emergencies or maintenance works. LLOs typically consist of a pressurized tunnel, a gate chamber with gates, and a free-surface outlet tunnel which conveys the resulting high-velocity flows. These high-velocity, highly turbulent flows generate sub-pressures in the gate chamber, resulting in challenges such as cavitation and gate vibration, while the combination with high sediment loads may induce hydro-abrasion. Adequate aeration through an air vent mitigates these issues. However, current design guidelines are inconsistent, with air demand data from model studies and prototypes exhibiting scatters of up to two orders of magnitude. To address this gap, this study conducted large-scale physical model experiments at the Laboratory of Hydraulics, Hydrology, and Glaciology (VAW), ETH Zürich, to investigate air demand, flow patterns, and air-water flow properties in LLOs. The study began with the development of a methodology to validate dual-tip conductivity probes for measuring air-water flow properties. These probes reliably measured interface velocities and chord lengths of individual bubbles advected in an upwards water flow across a wide range of bubble sizes and velocities, enabling their confident application for the subsequent investigations. First, the effect of wall roughness, a characteristic of LLOs influenced by material choice and wear, on high-velocity air-water flows was systematically evaluated. Findings revealed that wall roughness significantly influenced flow characteristics, increasing mixture flow depth and air entrainment while reducing flow velocity. Air demand increased with greater wall roughness, and a design equation was proposed. The investigation ultimately highlighted the necessity of accounting for wall roughness and the corresponding hydraulic regime when highvelocity air-water flows are involved. Then, the influence of tunnel lateral profile transitions, common in prototype LLOs, was assessed. Three lateral profile transitions (i.e., an abrupt transition and two gradual transitions of varying lengths) were analysed, showing a significant impact on shockwave patterns and air demand, leading to the derivation of novel empirical design equations. Finally, the study focused on bottom aerators, typically used in spillways to mitigate cavitation risk, but under-researched for LLOs. Their influence on air demand, flow patterns, and airwater flow properties were systematically evaluated, resulting in updated empirical design equations. These findings demonstrated the viability of using bottom aerators in LLOs, and established the foundations for developing comprehensive design guidelines. Ultimately, the present work significantly advanced the physical understanding of high-velocity air-water flows, and provided design guidelines for the safe design and efficient operation of low-level outlets.
  • Seismic Monitoring and Machine Learning for Gravitational Hazards in Alpine Terrain
    Item type: Monograph
    Wenner, Michaela (2022)
    VAW-Mitteilungen
  • Die Gutmütigkeit von Blockrampen im Überlastfall
    Item type: Conference Paper
    Weichert, Roman (2007)
    VAW-Mitteilungen ~ Blockrampen : Anforderungen und Bauweisen : Workshop der VAW vom 5. Oktober 2006
Publications 1 - 10 of 133