3D printed clamps for fixation of spinal segments in biomechanical testing
OPEN ACCESS
Loading...
Author / Producer
Date
2021-08-26
Publication Type
Journal Article
ETH Bibliography
yes
Citations
Altmetric
OPEN ACCESS
Data
Rights / License
Abstract
3D printed clamps provide multiple advantages compared to potting for the fixation of spinal specimens and in a recent study, superior fixation stability was reported. The aim of this study was to evaluate the fixation efficacy of 3D printed vertebra clamps during routine application and to present and evaluate a novel clamp for sacrum fixation. Further, public access to the template files is provided. 98 human single-level cadaveric specimens were biomechanically tested in flexion-extension (FE), lateral bending (LB), axial rotation (AR), anteroposterior shear (AS), lateral shear (LS) and axial compression-decompression (AC). Loading amplitudes were +/-7.5 Nm for FE, LB and AR, +/- 150 N for AS and LS and + 400/-100 N for AC. The novel sacrum clamp was used in 8 specimens. The median relative motion between clamps and specimens was 0.6 degrees in FE, 0.7 degrees in LB, 0.3 degrees in AR, 0.5 mm in AS, 0.5 mm in LS and 0.1 mm in AC. With sacrum clamps, the median relative motion was 0.3 degrees in FE, 0.1 degrees in LB, 0.08 degrees in AR, 0.8 mm in AS, 0.7 mm in LS and 0.2 mm in AC. The vertebra clamps used during routine testing provided better stability compared to the values in the literature in all six loading directions (p < 0.05). The sacrum clamp showed superior anchoring stability in three loading directions compared to the caudal vertebra clamps (p < 0.05), while inferior stability was measured in AS (p < 0.001). We conclude that 3D printed vertebra clamps and 3D printed sacrum clamps represent reliable methods for specimen fixation during routine biomechanical testing.
Permanent link
Publication status
published
Editor
Book title
Journal / series
Volume
125
Pages / Article No.
110577
Publisher
Elsevier
Event
Edition / version
Methods
Software
Geographic location
Date collected
Date created
Subject
Biomechanical; Spine; Testing; Fixture; Anchoring; Sacrum; Lumbar; 3D printed clamp
Organisational unit
03822 - Snedeker, Jess G. / Snedeker, Jess G.