Analysis of the tension chord in the flexural response of concrete elements: Methodology and application to weft-knitted textile reinforcement
OPEN ACCESS
Loading...
Author / Producer
Date
2022-06-15
Publication Type
Journal Article
ETH Bibliography
yes
Citations
Altmetric
OPEN ACCESS
Data
Rights / License
Abstract
The use of high-strength fibrous materials offers great potential to serve as the main reinforcement in the flexural response of lightweight concrete structures. Specifically, weft-knitted textile reinforcement allows creating complex geometries (i.e. doubly curved or folded) and introducing straight inlays as well as spatial features such as ribs within the fabric to enhance the bond conditions between the reinforcement and the concrete. While the evaluation of uniaxial tension tests to characterise the mechanical behaviour is usually straightforward, the vast majority of bending tests of textile reinforced concrete elements in the literature are limited to load–displacement data, which does not give direct information on the mechanical behaviour and makes it difficult to compare specimens with different geometries or reinforcement contents. This study presents a methodology based on digital image correlation measurements to directly assess the response in the tension chord of reinforced concrete beams in four-point bending. This methodology was applied and validated in an experimental campaign consisting of 16 bending tests with weft-knitted textile reinforcement. Various fibre materials, coating types and specimen geometries were tested, and the results were compared to corresponding uniaxial tension tests with the same type of reinforcement, generally showing a good agreement in the load-deformation behaviour and the crack kinematics. However, the textile reinforcement could not be utilised to the tensile strength obtained in uniaxial tension since all bending beams failed prematurely either in a combined bending-shear type failure (for most of the cement paste-coated textiles) or due to the delamination of the textile within a shear crack (for all epoxy-coated textiles). The Tension Chord Model with an assumed constant bond-slip relationship and an equivalent reinforcement ratio in bending yielded a good prediction of the stress–strain relationship, the tension stiffening effect, the crack widths and spacing.
Permanent link
Publication status
published
Editor
Book title
Journal / series
Volume
261
Pages / Article No.
114270
Publisher
Elsevier
Event
Edition / version
Methods
Software
Geographic location
Date collected
Date created
Subject
Textile reinforced concrete; Bending; Tension chord; Experimental study; Digital image correlation; Crack behaviour; KnitCrete
Organisational unit
09469 - Kaufmann, Walter / Kaufmann, Walter
02284 - NFS Digitale Fabrikation / NCCR Digital Fabrication
Notes
Funding
141853 - Digital Fabrication - Advanced Building Processes in Architecture (SNF)
Related publications and datasets
Cites: