Improving the crystallinity and texture of oblique-angle-deposited AlN thin films using reactive synchronized HiPIMS
OPEN ACCESS
Author / Producer
Date
2023-09-15
Publication Type
Journal Article
ETH Bibliography
yes
Citations
Altmetric
OPEN ACCESS
Data
Rights / License
Abstract
Many technologies, such as surface-acoustic-wave (SAW) resonators, sensors, and piezoelectric MEMS require highly-oriented and textured functional thin films. The best results are typically achieved for on-axis sputter geometries, but in some scenarios, this is not feasible, such as during co-deposition from multiple magnetrons or when coating substrates with high aspect ratios. Ionized physical vapor deposition (PVD) techniques such as HiPIMS can be used to accelerate the film-forming species onto the growing film using substrate-bias potentials, thus increasing ad-atom mobility and film texture. However, gas-ion incorporation can limit the feasibility of such synthesis approaches for defect-sensitive functional thin films. This work reports on the oblique-angle deposition of highly textured, c-axis oriented AlN (0002) films using reactive metal-ion synchronized HiPIMS. AlN thin films deposited using direct current magnetron sputtering (DCMS) and HiPIMS are discussed for comparison and the effect of ion irradiation through substrate biasing is investigated. We find that combining HiPIMS with a moderate substrate bias of only −30 V improves the crystalline quality and texture of the films significantly, while the process-gas incorporation and point defects formation can be further reduced by synchronizing the negative substrate bias potential to the Al-rich fraction of each HiPIMS pulse. In addition to a pronounced out-of-plane texture, the films show uniform polarization of the grains making this synthesis route suitable for piezoelectric applications. While the compressive stress in the films is still comparatively high, the results already demonstrate, that metal-ion synchronized HiPIMS can yield promising results for the synthesis of functional thin films under oblique-angle deposition conditions - even with low substrate-bias potentials.
Permanent link
Publication status
published
Editor
Book title
Journal / series
Volume
468
Pages / Article No.
129719
Publisher
Elsevier
Event
Edition / version
Methods
Software
Geographic location
Date collected
Date created
Subject
HiPIMS; AlN; Synchronized HiPIMS; Texture; Oblique-angle deposition
Organisational unit
03918 - Fiebig, Manfred / Fiebig, Manfred
Notes
Funding
188414 - Multifunctional oxide electronics using natural ferroelectric superlattices (SNF)
196061 - Designing oxide electronics with light (SNF)
196061 - Designing oxide electronics with light (SNF)