Show simple item record

dc.contributor.author
Pavliček, Florentina
dc.contributor.author
Beer, Yves
dc.contributor.author
Weikert, Sascha
dc.contributor.author
Mayr, Josef
dc.contributor.author
Wegener, Konrad
dc.contributor.editor
Wertheim, Rafi
dc.contributor.editor
Ihlefeldt, Steffen
dc.contributor.editor
Hochmuth, Carsten
dc.contributor.editor
Putz, Matthias
dc.date.accessioned
2021-07-05T13:00:17Z
dc.date.available
2017-06-12T10:11:28Z
dc.date.available
2021-05-26T08:27:56Z
dc.date.available
2021-07-05T13:00:17Z
dc.date.issued
2016
dc.identifier.issn
2212-8271
dc.identifier.other
10.1016/j.procir.2016.04.075
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/119028
dc.identifier.doi
10.3929/ethz-b-000119028
dc.description.abstract
The paper investigates the thermal influences of CO2- and oil-cooling on the precision of a machine tool. If CO2 is used for process cooling instead of oil, a different temperature distribution in the machine is observed. Different temperature distributions lead to different tool center point (TCP)-displacements. To measure TCP-displacements under real process conditions with CO2 and oil, a special measurement setup is designed, built and applied. A representative process for the machine is chosen to compare the different process coolings. The results show that the choice of coolant has a crucial influence on the TCP-displacements. It is shown that the thermally induced displacements can be reduced by 15 μm in y-direction, but increase about 4 μm in x-direction, when the coolant is changed from oil to CO2.
en_US
dc.format
application/pdf
en_US
dc.language.iso
en
en_US
dc.publisher
Elsevier
en_US
dc.rights.uri
http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subject
Cooling Thermal displacement
en_US
dc.subject
Machine Tool
en_US
dc.subject
Measurement
en_US
dc.title
Design of a Measurement Setup and First Experiments on the Influence of CO2-cooling on the Thermal Displacements on a Machine Tool
en_US
dc.type
Conference Paper
dc.rights.license
Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
dc.date.published
2016-05-30
ethz.book.title
7th HPC 2016 – CIRP Conference on High Performance Cutting
en_US
ethz.journal.title
Procedia CIRP
ethz.journal.volume
46
en_US
ethz.pages.start
23
en_US
ethz.pages.end
26
en_US
ethz.size
4 p.
en_US
ethz.version.deposit
publishedVersion
en_US
ethz.event
7th CIRP Conference on High Performance Cutting (HPC 2016)
en_US
ethz.event.location
Chemnitz, Germany
en_US
ethz.event.date
May 31 - June 2, 2016
en_US
ethz.identifier.scopus
ethz.publication.place
Amsterdam
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing::03641 - Wegener, Konrad / Wegener, Konrad
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing::03641 - Wegener, Konrad / Wegener, Konrad
en_US
ethz.date.deposited
2017-06-12T10:16:52Z
ethz.source
ECIT
ethz.identifier.importid
imp5936549900b3670296
ethz.ecitpid
pub:181015
ethz.eth
yes
en_US
ethz.availability
Open access
en_US
ethz.rosetta.installDate
2017-07-14T19:06:34Z
ethz.rosetta.lastUpdated
2018-08-02T18:29:49Z
ethz.rosetta.exportRequired
true
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Design%20of%20a%20Measurement%20Setup%20and%20First%20Experiments%20on%20the%20Influence%20of%20CO2-cooling%20on%20the%20Thermal%20Displacements%20on%20a%20Machine%20Too&rft.jtitle=Procedia%20CIRP&rft.date=2016&rft.volume=46&rft.spage=23&rft.epage=26&rft.issn=2212-8271&rft.au=Pavli%C4%8Dek,%20Florentina&Beer,%20Yves&Weikert,%20Sascha&Mayr,%20Josef&Wegener,%20Konrad&rft.genre=proceeding&rft_id=info:doi/10.1016/j.procir.2016.04.075&rft.btitle=7th%20HPC%202016%20%E2%80%93%20CIRP%20Conference%20on%20High%20Performance%20Cutting
 Search print copy at ETH Library

Files in this item

Thumbnail

Publication type

Show simple item record