Show simple item record

dc.contributor.author
Rentsch, Benedikt
dc.contributor.author
Manopulo, Niko
dc.contributor.author
Hora, Pavel
dc.date.accessioned
2023-10-10T08:21:56Z
dc.date.available
2017-06-12T08:44:06Z
dc.date.available
2017-08-18T14:59:30Z
dc.date.available
2018-01-17T08:22:26Z
dc.date.available
2018-03-02T07:19:34Z
dc.date.available
2023-10-10T08:21:56Z
dc.date.issued
2017-08
dc.identifier.issn
1960-6206
dc.identifier.issn
1960-6214
dc.identifier.other
10.1007/s12289-016-1308-5
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/242786
dc.identifier.doi
10.3929/ethz-b-000242786
dc.description.abstract
Conventional sheet metal spinning is an incremental forming process which typically involves the cost-effective and high-quality manufacturing of axissymmetric parts. The process is usually executed by highly skilled and experienced personnel which is able of optimizing the process parameters during production. Numerical simulation of the process can substantially help discovering systematic methodologies for optimal parameter determination and thus enable the full automation of the process using CNC machines. The present work aims to assess the quality of numerical modelling techniques by a direct comparison with metal spinning experiments. Based on the geometry and thickness distribution of intermediate and final stages of a spinned component, which are measured using the Optical 3D Digitization technique, the quality and validity of different numerical modeling approaches are assessed. Subsequently, deformation mechanisms occurring during process are identified, analysed and discussed.
en_US
dc.format
application/pdf
en_US
dc.language.iso
en
en_US
dc.publisher
Springer
en_US
dc.rights.uri
http://rightsstatements.org/page/InC-NC/1.0/
dc.subject
Incremental sheet forming
en_US
dc.subject
Metal spinning
en_US
dc.subject
FEM
en_US
dc.subject
Optical digitization
en_US
dc.subject
Incremental sheet forming
en_US
dc.subject
Metal spinning
en_US
dc.subject
FEM
en_US
dc.subject
Optical digitization
en_US
dc.title
Numerical modelling, validation and analysis of multi-pass sheet metal spinning processes
en_US
dc.type
Journal Article
dc.rights.license
In Copyright - Non-Commercial Use Permitted
dc.date.published
2016-07-08
ethz.journal.title
International Journal of Material Forming
ethz.journal.volume
10
en_US
ethz.journal.issue
4
en_US
ethz.journal.abbreviated
Int. j. mater. form.
ethz.pages.start
641
en_US
ethz.pages.end
651
en_US
ethz.version.deposit
publishedVersion
en_US
ethz.notes
It was possible to publish this article open access thanks to a Swiss National Licence with the publisher.
en_US
ethz.identifier.wos
ethz.identifier.scopus
ethz.identifier.nebis
005815087
ethz.publication.place
Paris
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02622 - Institut für virtuelle Produktion / Institute of Virtual Manufacturing::03685 - Hora, Pavel (emeritus) / Hora, Pavel (emeritus)
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02622 - Institut für virtuelle Produktion / Institute of Virtual Manufacturing
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02622 - Institut für virtuelle Produktion / Institute of Virtual Manufacturing::03685 - Hora, Pavel (emeritus) / Hora, Pavel (emeritus)
ethz.relation.isPartOf
10.3929/ethz-b-000267320
ethz.date.deposited
2017-06-12T08:49:16Z
ethz.source
ECIT
ethz.source
FORM
ethz.identifier.importid
imp59365487385d414703
ethz.ecitpid
pub:180086
ethz.eth
yes
en_US
ethz.availability
Open access
en_US
ethz.rosetta.installDate
2018-02-21T13:19:09Z
ethz.rosetta.lastUpdated
2024-02-03T04:38:32Z
ethz.rosetta.versionExported
true
dc.identifier.olduri
http://hdl.handle.net/20.500.11850/229871
dc.identifier.olduri
http://hdl.handle.net/20.500.11850/118143
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Numerical%20modelling,%20validation%20and%20analysis%20of%20multi-pass%20sheet%20metal%20spinning%20processes&rft.jtitle=International%20Journal%20of%20Material%20Forming&rft.date=2017-08&rft.volume=10&rft.issue=4&rft.spage=641&rft.epage=651&rft.issn=1960-6206&1960-6214&rft.au=Rentsch,%20Benedikt&Manopulo,%20Niko&Hora,%20Pavel&rft.genre=article&rft_id=info:doi/10.1007/s12289-016-1308-5&
 Search print copy at ETH Library

Files in this item

Thumbnail

Publication type

Show simple item record