Analysis of yield locus description on springback behaviour of CR700Y980T-DP steel
Abstract
To precisely predict springback, the stress and strain state has to be described correctly during the forming process and after load removal. In this work, different yield locus descriptions are considered for springback prediction of a CR700Y980T-DP steel with a thickness of 1.5 mm. Experiments and Finite Element Analyses (FEA) with LS-DYNA of a U-bending validation tool were performed and springback predictions compared. In the FEA Hill48, Barlat89 and Barlat's YLD2000 for isotropic hardening, Yoshida-Uemori as a kinematic hardening model and the homogeneous anisotropic hardening (HAH) model are chosen. Monotonic and two-step tensile tests with a directional change of stress are performed and cyclic tension-compression tests are used to determine the material parameters of the investigated hardening models. It is seen that both Yoshida-Uemori and HAH models provide a significant improvement in the springback prediction. The results, however greatly depend on the identification procedure as well as on the modelling of cross-loading contraction effects. Show more
Permanent link
https://doi.org/10.3929/ethz-b-000295631Publication status
publishedExternal links
Journal / series
IOP Conference Series: Materials Science and EngineeringVolume
Pages / Article No.
Publisher
Institute of PhysicsEvent
Organisational unit
03685 - Hora, Pavel (emeritus) / Hora, Pavel (emeritus)
More
Show all metadata