
Open access
Author
Gijesenbergh, Pieter
Pepicelli, Martina
Wirth, Christopher L.
Vermant, Jan
Puers, Robert
Date
2014Type
- Conference Paper
ETH Bibliography
yes
Altmetrics
Abstract
A semi-flexible SU-8 polymer microdevice was designed to deflect in response to a change in surface tension at an air-water interface. The suspended microtensiometer encloses a clean water-air interface, while externally the device is surrounded by an interface containing an insoluble component. The difference in surface tension between the inside and outside of the device, called the surface pressure, causes the device to deflect. Finite element simulations were performed to predict device behavior prior to fabrication. Finished devices were tested in a Langmuir trough during multiple compression and expansion cycles, using a platinum Wilhelmy plate for an independent surface pressure measurement. A resolution of 0.16 mN/m was achieved. Show more
Permanent link
https://doi.org/10.3929/ethz-a-010345329Publication status
publishedJournal / series
Procedia EngineeringVolume
Pages / Article No.
Publisher
CurranEvent
Subject
MEMS; SU-8; Interfacial rheology; Surface pressureOrganisational unit
02160 - Dep. Materialwissenschaft / Dep. of Materials09482 - Vermant, Jan / Vermant, Jan
More
Show all metadata
ETH Bibliography
yes
Altmetrics