Polymer Electrolyte Water Electrolysis: Correlating Performance and Porous Transport Layer Structure: Part II. Electrochemical Performance Analysis
Schmidt, Thomas J.
Büchi, Felix N.
- Journal Article
In the first paper of this series the bulk and surface structural properties of Ti-fiber based porous transport layers (PTL) were characterized and described. In this second part the correlation of structure to the performance in polymer electrolyte water electrolysis cells is analyzed by determination of the three main overpotentials of ohmic, kinetics and mass transport losses. The strongest correlation between the PTL bulk transport properties and cell performance is obtained for heat transport. The current density dependent temperature gradients show good agreement with ex situ determined heat conductivity from part one. However, surface properties of the PTL materials, have a stronger influence on cell performance than the bulk properties. Catalyst layer utilization and ohmic interfacial resistances correlate with the interfacial contact areas reported in part one and performance increases with increasing contact area. This is due to a local mass transport resistance decreasing with increasing catalyst layer utilization. Mehr anzeigen
Zeitschrift / SerieJournal of the Electrochemical Society
Seiten / Artikelnummer