Kohoutek, Tobias K.
- Conference Poster
Rights / licenseCreative Commons Attribution 3.0 Unported
This paper presents the first experience of a close rangebird’s eye view photogrammetry with range imaging (RIM) sensors for the real time generation of high resolution geo-referenced 3D surface models. The aim of this study was to develop a mobile, versatile and less costly outdoor survey methodology to measure natural surfaces compared to the terrestrial laser scanning (TLS). Two commercial RIM cameras (SR4000 by MESA Imaging AG and a CamCube 2.0 by PMDTechnologies GmbH) were mounted on a lightweight crane and on an unmanned aerial vehicle (UAV). The field experiments revealed various challenges in real time deployment of the two state-of-the-art RIM systems, e.g. processing of the large data volume. Acquisition strategy and data processing and first measurements are presented. The precision of the measured distances is less than 1 cm for good conditions. However, the measurement precision degraded under the test conditions due to direct sunlight, strong illumination contrasts and helicopter vibrations. Show more
Journal / seriesInternational Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Pages / Article No.
SubjectRange Imaging; UAV; Real time; 3D geometric mapping; Elevation model
Organisational unit03394 - Ingensand, Hilmar
03798 - Kirchner, James W. / Kirchner, James W.
MoreShow all metadata