Introduction of a Scaling Factor for Fracture Toughness Measurement of Rocks Using the Semi-circular Bend Test
Abstract
This article discusses the scale dependence of the mode I fracture toughness of rocks measured via the semi-circular bend (SCB) test. An extensive set of experiments is conducted to scrutinise the fracture toughness variations with size for three distinct rock types with radii ranging from 25 to 300 mm. The lengths of the fracture process zone (FPZ) for different sample sizes are measured using the digital image correlation (DIC) technique. A theoretical model is also established that relates the value of fracture toughness to the sample size. This theorem is based on the strip-yield model to estimate the length of FPZ, and the energy release rate concept to relate the FPZ length to the fracture toughness. This theoretical model does not rely on any experimental-based curve-fitting parameter, but only on the tensile strength of the rock type as well as the fracture toughness at a specific sample size. The size effects predicted by the theoretical model is in a good agreement with the experimental data on both fracture toughness and the FPZ length. Finally, theoretical correction factors are introduced for various geometrical configurations of the SCB specimen, using which a scale-independent mode I fracture toughness of the rock material can be estimated from the results of experiments performed on small samples. Show more
Permanent link
https://doi.org/10.3929/ethz-b-000494958Publication status
publishedExternal links
Journal / series
Rock Mechanics and Rock EngineeringVolume
Pages / Article No.
Publisher
SpringerSubject
Semi-circular bend (SCB); Size effect; Rock fracture toughness; Fracture process zone (FPZ); Digital image correlation (DIC)Organisational unit
08822 - Driesner, Thomas (Tit.-Prof.)
More
Show all metadata