Zur Kurzanzeige

dc.contributor.author
Trost, Burkhart
dc.contributor.author
Schuler, Harald
dc.contributor.author
Stojadinovic, Bozidar
dc.contributor.editor
Dragovich, Jeff
dc.contributor.editor
Hueste, Mary B.
dc.contributor.editor
Kehoe, Brian
dc.contributor.editor
Kim, Insung
dc.date.accessioned
2021-08-06T09:05:01Z
dc.date.available
2021-07-28T03:04:48Z
dc.date.available
2021-08-06T09:05:01Z
dc.date.issued
2020-03-01
dc.identifier.isbn
978-1-64195-094-7
en_US
dc.identifier.issn
0193-2527
dc.identifier.uri
http://hdl.handle.net/20.500.11850/497938
dc.description.abstract
Sliding failure of reinforced concrete shear walls was observed after the Chilean earthquakes in 1985 and 2010, during shaking table tests, and in many quasi-static cyclic shear walls tests. Sliding may occur along cold joints or flexural cracks that remain open due to permanent deformations induced during cyclic loading. If it occurs, sliding can significantly reduce the horizontal force resistance and change the deformation mechanism of reinforced concrete shear walls, and thereby markedly affect the seismic performance of shear wall buildings. This study provides the interaction diagrams intended to help reinforced concrete shear wall designers exclude the sliding failure mode. Regions where sliding, shear, and flexural failure modes are expected are delineated according to the shear wall shear span to length ratio, the axial force, the horizontal and vertical reinforcement ratios, and the concrete strength. These interaction diagrams are derived using a cyclic reinforced concrete wall response model that considers flexure, shear and sliding load-deformation relationships and the interaction between them. The inter-action diagram is used to develop design recommendations on how to avoid the sliding failure of reinforced concrete shear walls under earthquake loading.
en_US
dc.language.iso
en
en_US
dc.publisher
American Concrete Institute
en_US
dc.title
Interaction of sliding, shear, and flexure for earthquake design of reinforced concrete shear walls
en_US
dc.type
Conference Paper
ethz.book.title
Performance-Based Seismic Design of Concrete Buildings: State of the Practice
en_US
ethz.journal.title
American Concrete Institute, ACI Special Publication
ethz.journal.volume
SP-339
en_US
ethz.pages.start
196
en_US
ethz.pages.end
216
en_US
ethz.event
ACI Concrete Convention and Exposition Fall 2017
en_US
ethz.event.location
Anaheim, CA, USA
en_US
ethz.event.date
October 15-19, 2017
en_US
ethz.identifier.scopus
ethz.publication.place
Farmington Hills, MI
en_US
ethz.publication.status
published
en_US
ethz.date.deposited
2021-07-28T03:04:53Z
ethz.source
SCOPUS
ethz.eth
yes
en_US
ethz.availability
Metadata only
en_US
ethz.rosetta.installDate
2021-08-06T09:05:07Z
ethz.rosetta.lastUpdated
2022-03-29T10:58:17Z
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Interaction%20of%20sliding,%20shear,%20and%20flexure%20for%20earthquake%20design%20of%20reinforced%20concrete%20shear%20walls&rft.jtitle=American%20Concrete%20Institute,%20ACI%20Special%20Publication&rft.date=2020-03-01&rft.volume=SP-339&rft.spage=196&rft.epage=216&rft.issn=0193-2527&rft.au=Trost,%20Burkhart&Schuler,%20Harald&Stojadinovic,%20Bozidar&rft.isbn=978-1-64195-094-7&rft.genre=proceeding&rft.btitle=Performance-Based%20Seismic%20Design%20of%20Concrete%20Buildings:%20State%20of%20the%20Practice
 Printexemplar via ETH-Bibliothek suchen

Dateien zu diesem Eintrag

DateienGrößeFormatIm Viewer öffnen

Zu diesem Eintrag gibt es keine Dateien.

Publikationstyp

Zur Kurzanzeige