Show simple item record

dc.contributor.author
Asprone, Domenico
dc.contributor.author
Menna, Costantino
dc.contributor.author
Bos, Freek
dc.contributor.author
Mata Falcón, Jaime
dc.contributor.author
Ferrara, Liberato
dc.contributor.author
Auricchio, Ferdinando
dc.contributor.author
Cadoni, Ezio
dc.contributor.author
Cunha, Vítor M.C.F.
dc.contributor.author
Esposito, Laura
dc.contributor.author
Fromm, Asko
dc.contributor.author
Grünewald, Steffen
dc.contributor.author
Kloft, Harald
dc.contributor.author
Mechtcherine, Viktor
dc.contributor.author
Nerella, Venkatesh Naidu
dc.contributor.author
Schipper, Roel
dc.contributor.editor
Roussel, Nicolas
dc.contributor.editor
Lowke, Dirk
dc.date.accessioned
2022-03-03T07:46:20Z
dc.date.available
2022-03-01T15:26:12Z
dc.date.available
2022-03-03T07:46:20Z
dc.date.issued
2022
dc.identifier.isbn
978-3-030-90534-7
en_US
dc.identifier.isbn
978-3-030-90535-4
en_US
dc.identifier.issn
2213-2031
dc.identifier.issn
2213-204X
dc.identifier.other
10.1007/978-3-030-90535-4_6
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/534798
dc.description.abstract
The form freedom enabled by digital fabrication with concrete technologies provides advantages for a wide range of concrete based objects, from architectural to structural elements. The current chapter focuses on the specifics of structural design and engineering of DFC with emphasis on those technologies based on Additive Manufacturing with extrusion. Since it is a new and innovative way to build, a clear common approach to structural engineering has not yet been developed. As a result, this chapter aims to introduce the specific challenges of structural design and engineering with the additive manufacturing technology, providing an overview of structural typologies that have been developed (especially concerning the reinforcement strategies, including fibre reinforcement). Furthermore, the structural principles adopted in DFC and the codified approaches used in conventional reinforced concrete is compared, and putative structural testing procedures and validation methods for DFC are reported.
en_US
dc.language.iso
en
en_US
dc.publisher
Springer
en_US
dc.subject
Additive Manufacturing
en_US
dc.subject
Structural design
en_US
dc.subject
Reinforcement strategies
en_US
dc.subject
Structural testing
en_US
dc.title
Structural Design and Testing of Digitally Manufactured Concrete Structures
en_US
dc.type
Book Chapter
dc.date.published
2022-01-01
ethz.book.title
Digital Fabrication with Cement-Based Materials
en_US
ethz.journal.title
RILEM State-of-the-Art Reports
ethz.journal.volume
36
en_US
ethz.pages.start
187
en_US
ethz.pages.end
222
en_US
ethz.publication.place
Cham
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02115 - Dep. Bau, Umwelt und Geomatik / Dep. of Civil, Env. and Geomatic Eng.::02605 - Institut für Baustatik u. Konstruktion / Institute of Structural Engineering::09469 - Kaufmann, Walter / Kaufmann, Walter
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02284 - NFS Digitale Fabrikation / NCCR Digital Fabrication
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02115 - Dep. Bau, Umwelt und Geomatik / Dep. of Civil, Env. and Geomatic Eng.::02605 - Institut für Baustatik u. Konstruktion / Institute of Structural Engineering::09469 - Kaufmann, Walter / Kaufmann, Walter
en_US
ethz.date.deposited
2022-03-01T15:26:18Z
ethz.source
FORM
ethz.eth
yes
en_US
ethz.availability
Metadata only
en_US
ethz.rosetta.installDate
2022-03-03T07:46:33Z
ethz.rosetta.lastUpdated
2022-03-29T20:06:38Z
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Structural%20Design%20and%20Testing%20of%20Digitally%20Manufactured%20Concrete%20Structures&rft.jtitle=RILEM%20State-of-the-Art%20Reports&rft.date=2022&rft.volume=36&rft.spage=187&rft.epage=222&rft.issn=2213-2031&2213-204X&rft.au=Asprone,%20Domenico&Menna,%20Costantino&Bos,%20Freek&Mata%20Falc%C3%B3n,%20Jaime&Ferrara,%20Liberato&rft.isbn=978-3-030-90534-7&978-3-030-90535-4&rft.genre=bookitem&rft_id=info:doi/10.1007/978-3-030-90535-4_6&rft.btitle=Digital%20Fabrication%20with%20Cement-Based%20Materials
 Search print copy at ETH Library

Files in this item

FilesSizeFormatOpen in viewer

There are no files associated with this item.

Publication type

Show simple item record