Influence of the anode material on the breakdown behavior in dry electrical eischarge machining
dc.contributor.author
Roth, Raoul
dc.contributor.author
Balzer, Hartmi
dc.contributor.author
Kuster, Friedrich
dc.contributor.author
Wegener, Konrad
dc.contributor.editor
Wegener, Konrad
dc.date.accessioned
2019-10-15T13:15:48Z
dc.date.available
2017-06-10T07:41:19Z
dc.date.available
2017-08-18T10:43:26Z
dc.date.available
2019-10-15T13:15:48Z
dc.date.issued
2012
dc.identifier.issn
2212-8271
dc.identifier.other
10.1016/j.procir.2012.05.013
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/54043
dc.identifier.doi
10.3929/ethz-a-007355571
dc.description.abstract
In the last years dry electrical discharge machining (DEDM) has been proposed as an alternative to the traditional EDM. The main reason for these efforts is the absence of a liquid dielectric which results in a simpler and environmentally friendly machine. This paper presents measurements of the material removal rate in function of different tool electrode and work piece material put in relation with the breakdown behavior of the process .Whit this data it is shown that the breakdown mechanism in the gas filled work gap is different as in traditional EDM, where the gap is filled with liquid dielectric.
en_US
dc.format
application/pdf
en_US
dc.language.iso
en
en_US
dc.publisher
Elsevier
en_US
dc.rights.uri
http://creativecommons.org/licenses/by-nc-nd/3.0/
dc.subject
KOHLEELEKTRODEN + GRAPHITELEKTRODEN (ELEKTROCHEMIE)
en_US
dc.subject
ANODEN (ELEKTROTECHNIK)
en_US
dc.subject
MICROTECHNOLOGY
en_US
dc.subject
ELEKTROCHEMISCHES SENKEN (SPANENDE UMFORMUNG)
en_US
dc.subject
Breakdown
en_US
dc.subject
MIKROTECHNIK
en_US
dc.subject
ELECTRICAL DISCHARGE MACHINING, EDM (MACHINING)
en_US
dc.subject
PHYSIKALISCHE MATERIALPRÜFUNG, PHYSIKALISCHE MATERIALEIGENSCHAFTEN (MATERIALWISSENSCHAFTEN)
en_US
dc.subject
Removal
en_US
dc.subject
ANODES (ELECTRICAL ENGINEERING)
en_US
dc.subject
PHYSICAL MATERIALS TESTING, PHYSICAL PROPERTIES OF MATERIALS (MATERIALS SCIENCE)
en_US
dc.subject
COAL ELECTRODES AND GRAPHITE ELECTRODES (ELECTROCHEMISTRY)
en_US
dc.subject
FUNKENERODIEREN, FE (SPANENDE UMFORMUNG)
en_US
dc.subject
Electrical discharge machining (EDM)
en_US
dc.subject
ELECTROCHEMICAL COUNTERSINKING (MACHINING)
en_US
dc.title
Influence of the anode material on the breakdown behavior in dry electrical eischarge machining
en_US
dc.type
Conference Paper
dc.rights.license
Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported
dc.date.published
2012-07-19
ethz.book.title
Fifth CIRP Conference on High Performance Cutting 2012
en_US
ethz.journal.title
Procedia CIRP
ethz.journal.volume
1
en_US
ethz.pages.start
639
en_US
ethz.pages.end
644
en_US
ethz.version.deposit
publishedVersion
en_US
ethz.code.ddc
DDC - DDC::6 - Technology, medicine and applied sciences::620 - Engineering & allied operations
en_US
ethz.event
5th CIRP Conference on High Performance Cutting (HPC2019)
en_US
ethz.event.location
Zurich, Switzerland
en_US
ethz.event.date
June 4-7, 2010
en_US
ethz.identifier.nebis
007355571
ethz.publication.place
Amsterdam
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing
en_US
ethz.date.deposited
2017-06-10T07:43:14Z
ethz.source
ECOL
ethz.source
ECIT
ethz.identifier.importid
imp59364fa16042196471
ethz.identifier.importid
imp59366b2bced0441489
ethz.ecolpid
eth:5931
ethz.ecitpid
pub:87368
ethz.eth
yes
en_US
ethz.availability
Open access
en_US
ethz.rosetta.installDate
2017-07-15T12:49:42Z
ethz.rosetta.lastUpdated
2019-10-15T13:15:58Z
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Influence%20of%20the%20anode%20material%20on%20the%20breakdown%20behavior%20in%20dry%20electrical%20eischarge%20machining&rft.jtitle=Procedia%20CIRP&rft.date=2012&rft.volume=1&rft.spage=639&rft.epage=644&rft.issn=2212-8271&rft.au=Roth,%20Raoul&Balzer,%20Hartmi&Kuster,%20Friedrich&Wegener,%20Konrad&rft.genre=proceeding&rft_id=info:doi/10.1016/j.procir.2012.05.013&rft.btitle=Fifth%20CIRP%20Conference%20on%20High%20Performance%20Cutting%202012
Files in this item
Publication type
-
Conference Paper [33094]