Show simple item record

dc.contributor.author
Maradia, Umang
dc.contributor.author
Boccadoro, Marco
dc.contributor.author
Stirnimann, Josef
dc.contributor.author
Beltrami, Ivano
dc.contributor.author
Kuster, Friedrich
dc.contributor.author
Wegener, Konrad
dc.contributor.editor
Wegener, Konrad
dc.date.accessioned
2021-07-06T07:58:58Z
dc.date.available
2017-06-10T08:10:37Z
dc.date.available
2017-08-14T08:15:48Z
dc.date.available
2018-04-05T12:25:32Z
dc.date.available
2018-11-01T11:38:30Z
dc.date.available
2021-07-06T07:58:58Z
dc.date.issued
2012
dc.identifier.issn
2212-8271
dc.identifier.other
10.1016/j.procir.2012.04.029
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/54671
dc.identifier.doi
10.3929/ethz-a-007355601
dc.description.abstract
Micro EDM has been identified since more than a decade as suitable process for machining complex shaped structures with high aspect ratio, though only through variations of EDM such as micro EDM milling, micro EDM drilling, coated electrodes etc. In the current paper, we present the research focused on analysing the capability for implementation of die-sink EDM in meso - micro scale machining (structures with surface area smaller than 10mm2 down to 0.05mm2) by concentrating on primary process parameters to obtain high material removal rate, low tool electrode wear with high form accuracy and precision. Graphite electrodes were mill machined in meso-micro scale with high precision and accuracy. Low tool wear technology was developed for using graphite electrodes in meso-micro EDM offering economical and energy efficient solution in meso-micro scale machining.
en_US
dc.format
application/pdf
en_US
dc.language.iso
en
en_US
dc.publisher
Elsevier
en_US
dc.rights.uri
http://creativecommons.org/licenses/by-nc-nd/3.0/
dc.subject
Micromachining
en_US
dc.subject
Electrical discharge machining (EDM)
en_US
dc.subject
Precision manufacturing
en_US
dc.title
Die-sink EDM in meso-micro machining
en_US
dc.type
Conference Paper
dc.rights.license
Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported
dc.date.published
2012-07-19
ethz.book.title
Fifth CIRP Conference on High Performance Cutting 2012
en_US
ethz.journal.title
Procedia CIRP
ethz.journal.volume
1
en_US
ethz.pages.start
166
en_US
ethz.pages.end
171
en_US
ethz.size
6 p.
en_US
ethz.version.deposit
publishedVersion
en_US
ethz.code.ddc
DDC - DDC::6 - Technology, medicine and applied sciences::620 - Engineering & allied operations
en_US
ethz.event
5th CIRP International Conference on High Performance Cutting (HPC 2012)
en_US
ethz.event.location
Zurich, Switzerland
en_US
ethz.event.date
June 4-7, 2010
en_US
ethz.publication.place
Amsterdam
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing::03641 - Wegener, Konrad / Wegener, Konrad
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02130 - Dep. Maschinenbau und Verfahrenstechnik / Dep. of Mechanical and Process Eng.::02623 - Inst. f. Werkzeugmaschinen und Fertigung / Inst. Machine Tools and Manufacturing::03641 - Wegener, Konrad / Wegener, Konrad
ethz.date.deposited
2017-06-10T08:11:39Z
ethz.source
ECOL
ethz.source
ECIT
ethz.identifier.importid
imp59366b2bd2d2719714
ethz.identifier.importid
imp59364fade619557144
ethz.ecolpid
eth:5932
ethz.ecitpid
pub:88223
ethz.eth
yes
en_US
ethz.availability
Open access
en_US
ethz.rosetta.installDate
2017-07-18T16:16:17Z
ethz.rosetta.lastUpdated
2022-03-29T10:17:31Z
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Die-sink%20EDM%20in%20meso-micro%20machining&rft.jtitle=Procedia%20CIRP&rft.date=2012&rft.volume=1&rft.spage=166&rft.epage=171&rft.issn=2212-8271&rft.au=Maradia,%20Umang&Boccadoro,%20Marco&Stirnimann,%20Josef&Beltrami,%20Ivano&Kuster,%20Friedrich&rft.genre=proceeding&rft_id=info:doi/10.1016/j.procir.2012.04.029&rft.btitle=Fifth%20CIRP%20Conference%20on%20High%20Performance%20Cutting%202012
 Search print copy at ETH Library

Files in this item

Thumbnail
Thumbnail

Publication type

Show simple item record