Broadband Active Load-Modulation Power Amplification Using Coupled-Line Baluns: A Multifrequency Role-Exchange Coupler Doherty Amplifier Architecture

Abstract

Broadband active load-modulation power amplifiers (PAs) are effective to enable multistandard wireless communication systems with high dynamic-range wideband signals and high energy efficiency. Traditional Doherty or outphasing PA architectures support their classic active load-modulation operations but, however, exhibit limited carrier bandwidth. We propose a broadband active load-modulation PA architecture with multifrequency role-exchange coupler-based Doherty amplifier (MF-CDA) operations to cover over-an-octave bandwidth. A proof-of-concept PA has been designed and fabricated in a 45-nm RF CMOS SOI process, which achieves a peak PAE of 41.88%-19.4% with Psat of over 22.66-19.53 dBm from 26 to 60 GHz. The PA also achieves a 33.75%-10.2% 6-dB PBO efficiency with its best 1.8 × efficiency enhancement over an ideal Class-B PA. Using a single-carrier 64-QAM signal with 0.8-3 GSym/S (4.8-18 Gb/s), the PA supports an average Pout of 15.8-11.3 dBm with an average PAE of 23.8%-8.5% at -23-dB rms EVM over the entire bandwidth. For a single-carrier 16-QAM signal with 1-2.5 GSym/S (4-10 Gb/s), the PA achieves an average Pout of 18.7-15.6 dBm with an average PAE of 34%-14.8% at >- 20-dB rms EVM over the bandwidth. The PA also supports 5G NR modulation using 5G new radio (NR) FR2 200 MHz 1-CC 64-QAM signals, achieving 16.54%-5.2% average PAE at 12.25-9.34 dBm and average Pout with an rms EVM of -24 dB over 26-60 GHz. © 1966-2012 IEEE.