Show simple item record

dc.contributor.author
Bischof, Patrick
dc.contributor.author
Mata Falcón, Jaime
dc.contributor.author
Burger, Joris Jan
dc.contributor.author
Kaufmann, Walter
dc.contributor.editor
Buswell, Richard
dc.contributor.editor
Blanco, Ana
dc.contributor.editor
Cavalaro, Sergio
dc.contributor.editor
Kinnell, Peter
dc.date.accessioned
2022-07-12T07:47:06Z
dc.date.available
2022-07-12T07:11:07Z
dc.date.available
2022-07-12T07:47:06Z
dc.date.issued
2022
dc.identifier.isbn
978-3-031-06115-8
en_US
dc.identifier.isbn
978-3-031-06116-5
en_US
dc.identifier.issn
2211-0844
dc.identifier.other
10.1007/978-3-031-06116-5_36
en_US
dc.identifier.uri
http://hdl.handle.net/20.500.11850/557503
dc.identifier.doi
10.3929/ethz-b-000557503
dc.description.abstract
Most current technologies in digital fabrication with concrete (DFC) rely on controlled environmental conditions and, thus, have been used in prefabricated construction. Prefabricated reinforced concrete elements produced in factories need assembly and connection on-site. Using DFC for producing tailor-made geometries and applying surface roughness generates new possibilities for the design of connections. DFC enables (i) fabricating dry connections, for example, by using exact formworking or milling processes, and (ii) the relatively straightforward preparation of rough construction joints, for example, by using extrusion processes. In a recent study, a series of different specimens incorporating connections were tested using deformation-controlled push-off tests. This contribution presents the experimental campaign including design, preparation and test results employing keyed connections produced with the Eggshell technology, a fabrication process using 3D printed thin plastic formwork.
en_US
dc.format
application/pdf
en_US
dc.language.iso
en
en_US
dc.publisher
Springer
en_US
dc.subject
Digital fabrication with concrete
en_US
dc.subject
Prefabricated construction
en_US
dc.subject
Connections
en_US
dc.subject
Shear keys
en_US
dc.subject
Eggshell
en_US
dc.title
Digitally Fabricated Keyed Concrete Connections
en_US
dc.type
Conference Paper
dc.date.published
2022-06-22
ethz.book.title
Third RILEM International Conference on Concrete and Digital Fabrication
en_US
ethz.journal.title
RILEM Bookseries
ethz.journal.volume
37
en_US
ethz.pages.start
241
en_US
ethz.pages.end
246
en_US
ethz.version.deposit
publishedVersion
en_US
ethz.event
3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2022)
en_US
ethz.event.location
Loughborough, United Kingdom
en_US
ethz.event.date
June 27–29, 2022
en_US
ethz.grant
Digital Fabrication - Advanced Building Processes in Architecture
en_US
ethz.publication.place
Cham
en_US
ethz.publication.status
published
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02115 - Dep. Bau, Umwelt und Geomatik / Dep. of Civil, Env. and Geomatic Eng.::02605 - Institut für Baustatik u. Konstruktion / Institute of Structural Engineering::09469 - Kaufmann, Walter / Kaufmann, Walter
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02284 - NFS Digitale Fabrikation / NCCR Digital Fabrication
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02602 - Inst. f. Technologie in der Architektur / Institute for Technology in Architecture::03708 - Gramazio, Fabio / Gramazio, Fabio
en_US
ethz.leitzahl
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02602 - Inst. f. Technologie in der Architektur / Institute for Technology in Architecture::03709 - Kohler, Matthias / Kohler, Matthias
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02115 - Dep. Bau, Umwelt und Geomatik / Dep. of Civil, Env. and Geomatic Eng.::02605 - Institut für Baustatik u. Konstruktion / Institute of Structural Engineering::09469 - Kaufmann, Walter / Kaufmann, Walter
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02602 - Inst. f. Technologie in der Architektur / Institute for Technology in Architecture::03709 - Kohler, Matthias / Kohler, Matthias
en_US
ethz.leitzahl.certified
ETH Zürich::00002 - ETH Zürich::00012 - Lehre und Forschung::00007 - Departemente::02100 - Dep. Architektur / Dep. of Architecture::02602 - Inst. f. Technologie in der Architektur / Institute for Technology in Architecture::03708 - Gramazio, Fabio / Gramazio, Fabio
en_US
ethz.grant.agreementno
141853
ethz.grant.agreementno
141853
ethz.grant.fundername
SNF
ethz.grant.fundername
SNF
ethz.grant.funderDoi
10.13039/501100001711
ethz.grant.funderDoi
10.13039/501100001711
ethz.grant.program
NCCR (NFS)
ethz.grant.program
NCCR (NFS)
ethz.date.deposited
2022-07-12T07:11:12Z
ethz.source
FORM
ethz.eth
yes
en_US
ethz.availability
Embargoed
en_US
ethz.date.embargoend
2023-06-26
ethz.rosetta.installDate
2022-07-12T07:47:12Z
ethz.rosetta.lastUpdated
2022-07-12T07:47:12Z
ethz.rosetta.exportRequired
true
ethz.rosetta.versionExported
true
ethz.COinS
ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.atitle=Digitally%20Fabricated%20Keyed%20Concrete%20Connections&rft.jtitle=RILEM%20Bookseries&rft.date=2022&rft.volume=37&rft.spage=241&rft.epage=246&rft.issn=2211-0844&rft.au=Bischof,%20Patrick&Mata%20Falc%C3%B3n,%20Jaime&Burger,%20Joris%20Jan&Kaufmann,%20Walter&rft.isbn=978-3-031-06115-8&978-3-031-06116-5&rft.genre=proceeding&rft_id=info:doi/10.1007/978-3-031-06116-5_36&rft.btitle=Third%20RILEM%20International%20Conference%20on%20Concrete%20and%20Digital%20Fabrication
 Search print copy at ETH Library

Files in this item

Thumbnail

Publication type

Show simple item record