Thermoplastic large-scale 3D printing of a light-distribution and fabrication-informed facade panel
Open access
Autor(in)
Alle anzeigen
Datum
2023-10Typ
- Conference Paper
ETH Bibliographie
yes
Altmetrics
Abstract
This study analyses the thermoplastic 3D printing feasibility of a performative large-scale facade prototype. The large-scale facade panel is a geometry informed by fabrication and environmental parameters integrated gradually in the computational design process. The computational design identifies initially the 3D printing freeform potential employed by architects and designers. Then, light distribution, an environmental performance, is integrated in the computational design, by testing daylight simulations. Next, the fabrication parameters are integrated in the computational design for achieving geometry accuracy and preventing deformations. These parameters are surface angle degree, robotic speed, material extrusion values, adhesion to print bed, and inner-layer adhesion. Four iterations of the facade prototype were manufactured from polyethylene terephthalate with large-scale robotic material extrusion. The final fabrication experiment, measuring 2000 mm x 100 mm x 2000 mm, brings conclusive remarks on the key findings of this study and design guidelines for 3D printing performative facades. Mehr anzeigen
Persistenter Link
https://doi.org/10.3929/ethz-b-000639445Publikationsstatus
publishedBuchtitel
Conference on Advanced Building Skins 2023Verlag
Advanced Building Skins GmbHKonferenz
Thema
3D Printing; Additive manufacturing; Facade; Light distribution; Iterative designOrganisationseinheit
02284 - NFS Digitale Fabrikation / NCCR Digital Fabrication03708 - Gramazio, Fabio / Gramazio, Fabio
03709 - Kohler, Matthias / Kohler, Matthias
03902 - Schlüter, Arno / Schlüter, Arno
Förderung
-- - NCCR Digital Fabrication (SNF)
Zugehörige Publikationen und Daten
Documents: https://doi.org/10.3929/ethz-b-000648606
ETH Bibliographie
yes
Altmetrics