Large-scale hollow-core 3D printing (HC3DP): A polymer 3D printing technology for large-scale ultralightweight components
Open access
Date
2023-09Type
- Journal Article
Abstract
Material extrusion (ME) has become a popular 3D printing method for large-scale applications such as in the automotive, naval, aerospace, and architecture sectors. It allows the production of complex, customized parts without the need of labour-intensive molds. The increasing need to produce larger and larger parts has been addressed with the introduction of large pellet extrusion systems to increase the extrusion rate. With these extruders the production time is not limited by the extrusion rate of the extruder (kg/h) but by the time the material needs to cool down before the next layer can be printed consecutively. Furthermore, larger bead dimensions result in increased material usage and, therefore, might affect the environmental impact of the printed element. In this study, a method for large extrusion 3D printing based on hollow beads is proposed, to address the limitations of speed, cooldown and maximize the extrusion rate of thermoplastic 3D printing. This paper introduces Hollow-Core 3D printing (HC3DP) and compares it to off-the shelf large-scale pellet extruders and their maximum achievable extrusion rate for a given geometry. A comparative analysis of cooldown characteristics between conventional thermoplastic extrusion 3D printing and HC3DP validates that the latter increases the maximum possible extrusion rate. Additionally, the successful 3D printing of large-scale beads with multiple polymer feedstocks is demonstrated. Then the data associated with printing speed and material usage is presented and discussed in comparison with thermoplastic and other large-scale 3D printing methods. The fabrication of large-scale hollow-core beads at a dimension of 24×20mm is showcased with an extrusion rate of 7250 mm3/s (1308 material, 5941 air). HC3DP for large-scale applications is validated through the production of 2-meter tall cylinders with a diameter of 400 mm in less than two hours. Furthermore, bespoke die geometries that subdivide the inside of hollow 3D-printed beads are presented. To successfully print those, the concept of differentiated internal air pressure per print point is introduced. Finally, 3PT bending tests are conducted to compare different die geometries. In conclusion, this study presents a printing method that highlights the benefits of hollow core 3D printing for large-scale applications, showcasing its positive impact on both the printing process and resulting part properties. By addressing the limitations of traditional approaches, HC3DP pushes polymer 3D printing into a scale relevant for architecture and construction, offering similar extrusion rates as concrete 3DP. Show more
Permanent link
https://doi.org/10.3929/ethz-b-000643545Publication status
publishedExternal links
Journal / series
Additive ManufacturingVolume
Pages / Article No.
Publisher
ElsevierSubject
Hollow core 3D printing; Large-scale 3DP; Thermoplastic AM; Lightweight; Large-scaleOrganisational unit
02284 - NFS Digitale Fabrikation / NCCR Digital Fabrication09566 - Dillenburger, Benjamin / Dillenburger, Benjamin
09566 - Dillenburger, Benjamin / Dillenburger, Benjamin
Funding
-- - NCCR Digital Fabrication (SNF)
More
Show all metadata