Recent Submissions 

  1. Wind Effect on PV Module Temperature: Analysis of Different Techniques for an Accurate Estimation 

    Schwingshackl, C.; Petitta, M.; Wagner, J.E.; et al. (2013)
    Energy procedia
    Conference Proceedings
  2. Dynamically decoupling base and end-effector motion for mobile manipulation using visual-inertial sensing 

    Sandy, Timothy; Buchli, Jonas (2017)
    2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
    In this work we present a co-located task space sensing and control system designed to control the end-effector motion of a mobile manipulator in the presence of dynamic and unknown base motion. We present a method for generating end-effector motion estimates at 1 kilohertz for use in real time control through visual-inertial sensor fusion. We show that a Moving Horizon Estimator outperforms Kalman filter-based methods in generating ...
    Conference Proceedings
  3. Magnetic Resonance Imaging of Wet Fluidization 

    Boyce, Christopher M.; Penn, Alexander; Prüssmann, Klaas P.; et al. (2017)
    Conference Proceedings
  4. Solar thermochemical reactor technology for splitting CO2 and H2O 

    Furler, Philipp; Marxer, Daniel; Takacs, Michael; et al. (2018)
    Conference Proceedings
  5. Objective Estimation of Spatially Variable Parameters of Epidemic Type Aftershock Sequence Model: Application to California 

    Nandan, Shyam; Ouillon, Guy; Wiemer, Stefan; et al. (2017)
    Conference Proceedings
  6. Objective Estimation of Temporally Variable Parameters of Epidemic Type Aftershock Sequence Model: Application to Geothermal Regions 

    Nandan, Shyam; Ouillon, Guy; Wiemer, Stefan; et al. (2017)
    Conference Proceedings
  7. Steady-State and Transient Response of a Micromechanical Broadband Shoaling Amplifier 

    Müller, Michelle; Maiwald, Verena; Roman, Cosmin; et al. (2017)
    Proceedings
    Conference Proceedings
  8. Sorting by swaps with noisy comparisons 

    Gavenčiak, Tomáš; Geissmann, Barbara; Lengler, Johannes (2017)
    Proceedings of the Genetic and Evolutionary Computation Conference on - GECCO '17
    Conference Proceedings
  9. Robotic Integral Attachment 

    Robeller, Christopher; Helm, Volker; Thoma, Andreas; et al. (2017)
    Conference Proceedings
  10. 3-D Printing: A New Method to Investigate the Effect of Deformation on Remanent Magnetization 

    Hirt, Ann; Mahfuj, Ali; Pane, Salvador; et al. (2017)
    Conference Proceedings
  11. Skeletal Mechanism Construction by Entropy Production Analysis: Detailed Reaction Mechanisms with Irreversible Reactions 

    Acampora, Luigi; Kooshkbaghi, Mahdi; Frouzakis, Christos E.; et al. (2017)
    Conference Proceedings
  12. Combining current vector data with historical textual data and data extracted from old maps to study the development of the city of Zurich, Switzerland 

    Tsorlini, Angeliki; Sieber, René; Hurni, Lorenz (2017)
    Settlement development is a topic of great interest for many researchers from different scientific areas. The research on this topic is based on historic city plans and maps from different time periods, or even on historical textual data, which can give information concerning the construction year of the buildings or information about expansions of the city plans over time. The unavailability of historic city plans, maps or diagrams at ...
    Conference Proceedings
  13. Quantile-based optimization under uncertainties using bootstrap polynomial chaos expansions 

    Moustapha, Maliki; Sudret, Bruno (2017)
    Reliability-based design optimization (RBDO) is a well-known approach for the design of structures under uncertainties. Because of its high computational cost, it has been coupled to metamodeling in the past few years. Polynomial chaos expansions are a well-established metamodel in the field of uncertainty quantification. However, they have not been extensively used for RBDO because of their lack of accuracy when it comes to approximating ...
    Conference Proceedings
  14. Combustion and Emissions Investigations Using OME and Stoichiometric Operation in a Compression Ignition Engine 

    Barro, Christophe; Boulouchos, Konstantinos; Liati, Anthi; et al. (2017)
    Conference Proceedings
  15. Influence of comb-type superplasticizers on the properties of low clinker cementitious materials 

    Palacios, Marta; Naskar, Nilanjon; Boscaro, Federica; et al. (2017)
    Conference Proceedings
  16. Aerogel mortars and possibilities for their application 

    Sanz-Pont, Daniel; Flatt, Robert J. (2017)
    Conference Proceedings
  17. Innovative Research for Organic 3.0 

    Rahmann, Gerold; Andres, Christian; Yadav, Ashok K.; et al. (2017)
    Thünen Report 54
    Conference Proceedings
  18. Innovative Research for Organic 3.0 - Volume 2: Proceedings of the Scientific Track Proceedings of the Scientific Track at the Organic World Congress 2017 

    Rahmann, Gerold; Andres, Christian; Yadav, Ashok K.; et al. (2017)
    Thünen Report
    Conference Proceedings
  19. Selected Proceedings from the 231st ECS Meeting: New Orleans, LA – Spring 2017 

    Alkire, R.; Arnold, M.S.; Atanassov, P.L.; et al. (2017)
    Conference Proceedings

View more