Search
Results
-
Thermal Error Compensation Models Utilizing the Power Consumption of Machine Tools
(2023)3rd International Conference on Thermal Issues in Machine Tools (ICTIMT2023)Thermal errors are among the most significant contributors to deviations of products manufactured on modern machine tools (MTs). Reducing them is typically achieved through either design adaptation, active cooling of the MT and its environment, or compensation using measurements or model-based predictions. Model-based compensation strategies promise to have the lowest environmental footprint by far. In general, a compensation model needs ...Conference Paper -
Cutting Process Tribometer Experiments for Evaluation of Friction Coefficient close to a CFRP Machining Operation
(2017)Finishing operations of Carbon Fibre Reinforced Polymers (CFRP), such as drilling or milling are known to generate heavy tool wear. Consequently, ultra-hard cutting materials like diamond-coated carbide tools or PCD-tools are utilised. To further improve the lifetime of these tools, it is recommended to adjust the tool geometry, process parameters and coating to the relevant application. Usually, the process optimisations base on knowledge ...Conference Paper -
Single crater dimensions and wire diameter influence on Wire-EDM
(2022)Procedia CIRP ~ 21st CIRP Conference on Electro Physical and Chemical Machining, ISEM XXIIn Wire Electrical Discharge Machining (WEDM) the erosion process is based on the superposition of craters. The plasma channel and the craters’ shape have an impact on the process and on the characteristics of the machined surface. This impact goes from the cutting speed to the surface roughness passing through workpiece temperature gradient during the spark. Several models simulate the crater formation through thermal analysis, yielding ...Conference Paper -
Energy Equivalent of Compressed Air Consumption in a Machine Tool Environment
(2013)Innovative solutions : Proceedings of the 11th Global Conference on Sustainable ManufacturingConference Paper -
Predicting the Springback of Metal Cutting Operations Using Mesh Free Methods
(2015)Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015Conference Paper -
Integration of Effort Aspect into Control Strategy Dimensioning and Comparison
(2010)The 12th Mechatronics Forum Biennal International Conference : June 28-30, 2010, Swiss Federal Institute of Technology, ETH Zurich, SwitzerlandConference Paper -
Evaluation of reflectivity of metal parts by a thermo-camera
(2010)InfraMation 2010 proceedingsConference Paper -
Thermal issues in 5-axis machine tools
(2014)The Proceedings of MTTRF 2013 Annual MeetingConference Paper -
An energy model for the calculation of losses and their effects on machining accuracy
(2012)Proceedings of the 12th international conference of the european society for precision engineering and nanotechnologyConference Paper -
Friction Effects between Ultrasonic Cutting Blade and Sheet Stack
(2012)2012 IEEE International Ultrasonics Symposium ProceedingsConference Paper