Abstract
The central component of the CMS detector is the largest silicon tracker ever built. The precise alignment of this complex device is a formidable challenge, and only achievable with a significant extension of the technologies routinely used for tracking detectors in the past. This article describes the full-scale alignment procedure as it is used during LHC operations. Among the specific features of the method are the simultaneous determination of up to 200 000 alignment parameters with tracks, the measurement of individual sensor curvature parameters, the control of systematic misalignment effects, and the implementation of the whole procedure in a multi-processor environment for high execution speed. Overall, the achieved statistical accuracy on the module alignment is found to be significantly better than 10μm. Show more
Permanent link
https://doi.org/10.3929/ethz-b-000088778Publication status
publishedExternal links
Journal / series
Journal of InstrumentationVolume
Pages / Article No.
Publisher
Institute of PhysicsSubject
Particle tracking detectors; Detector alignment and calibration methods (lasers, sources, particle-beams); Large detector systems for particle and astroparticle physicsOrganisational unit
03381 - Pauss, Felicitas (emeritus)
03593 - Dissertori, Günther / Dissertori, Günther
03904 - Wallny, Rainer / Wallny, Rainer
08803 - Grab, Christoph (Tit.Prof.)
More
Show all metadata
ETH Bibliography
yes
Altmetrics