Quantification of large wood (LW) impact forces at field-scale using SmartWood
METADATA ONLY
Loading...
Author / Producer
Date
2022
Publication Type
Conference Paper
ETH Bibliography
yes
Citations
Altmetric
METADATA ONLY
Data
Rights / License
Abstract
While wood in rivers constitutes an essential element for the regulation of stream power and habitat creation, large wood (LW) carried during floods poses a high risk for interactions with in-stream structures such as bridges, dams or weirs. Although significant damage or total failure of impacted structures is frequently reported, there are no field-scale data of LW impacts available to date. Thus, acceleration data from innovative inertial measurement units (IMUs), which are deployed in the course of the SmartWood_3D research project at the Laboratory of Hydraulics, Hydrology and Glaciology (VAW) of ETH Zurich, were used to measure field-scale impact forces of transported LW during floods. The field experiments considered the release of up to four sensor-tagged prototype logs – SmartWood – at a time into flooded channels (approximately HQ₁) in Switzerland. Each SmartWood-log is fully debranched and measures 4.40 m in length at a mean diameter of 0.33 m. During the preparation of SmartWood in the laboratory, wood density decreased from 680 kg/m³ for the freshly cut and wet logs directly from the forest to 450 kg/m³ for the completed SmartWood logs at dry condition. The wetted density of SmartWood during the field experiments was roughly 500 kg/m³, yielding an impacting mass of roughly 188 kg. After SmartWood had been released into the channel, the logs were instantly mobilised by the high flow. On their journey downwards, complex LW dynamics were observed and successfully measured with high temporal resolution for the first time to the authors’ knowledge. Of particular interest were interactions of SmartWood with channel boundaries and in-stream obstacles (e.g., boulders). Deceleration of impacting logs were found to be significant, reaching the maximum measurable acceleration range (± 16 g) of the applied smart-sensors. The gained results contribute to a better understanding of LW dynamics in rivers and will help engineers to assess the vulnerability of existing structures as well as to improve the design of future flood-resilient structures in fluvial environments.
Permanent link
Publication status
published
Book title
Proceedings of the 39th IAHR World Congress
Journal / series
Volume
Pages / Article No.
5182 - 5190
Publisher
International Association for Hydro-Environment Engineering and Research
Event
39th IAHR World Congress: From Snow to Sea
Edition / version
Methods
Software
Geographic location
Date collected
Date created
Subject
SmartWood; Floods; Impact forces; Large wood dynamics; Wood in rivers
Organisational unit
03820 - Boes, Robert / Boes, Robert