Surface Topography: Metrology and Properties

Journal: Surface Topography: Metrology and Properties

IOP Publishing

Publications 1 - 1 of 1

New horizons in selective laser sintering surface roughness characterization
Vetterli, Marc; Schmid, Manfred; Knapp, Wolfgang; et al. (2017)
Surface Topography: Metrology and Properties
Powder-based additive manufacturing of polymers and metals has evolved from a prototyping technology to an industrial process for the fabrication of small to medium series of complex geometry parts. Unfortunately due to processing of powder as basis material and the successive addition of layers to produce components, an important surface roughness inherent to the process has been observed since the beginnings of these technologies. A novel characterization method based on an elastomeric pad coated with a reflective layer, the Gelsight, was found to be reliable and fast to characterize surfaces processed by Selective Laser Sintering (SLS) of polymers. With help of this method, a qualitative and quantitative investigation of SLS surfaces is feasible. Repeatability and reproducibility investigations are performed for both 2D and 3D areal roughness parameters. Based on the good results, the Gelsight is used for the optimization of vertical SLS surfaces. A model built on laser scanning parameters is proposed and after confirmation could achieve a roughness reduction of 10% based on the Sq parameter. The Gelsight could be successfully identified as a fast, reliable and versatile surface topography characterization method as it applies to all kind of surfaces.

Publications 1 - 1 of 1