Air Demand of Low-Level Outlets for Large Dams
OPEN ACCESS
Loading...
Author / Producer
Date
2020-08
Publication Type
Journal Article
ETH Bibliography
yes
Citations
Altmetric
OPEN ACCESS
Data
Rights / License
Abstract
Low-level outlets are key safety elements of reservoir dams, especially for structures with high heads. Their main purpose is the regulation and—if required—rapid drawdown of the reservoir water level in case of maintenance works or structural damage to the dam. A common outlet configuration for high-head structures uses a high-pressure vertical slide gate discharging into a free-flow tunnel. The high-speed water jet in the outlet tunnel leads to considerable air entrainment and transport, resulting in negative air pressures, which can aggravate problems with gate vibration, cavitation, and slug flow. Sufficient air supply via an air vent mitigates such problems. However, current methods for estimating the required air demand do not incorporate all factors affecting design of air vents for low-level outlets. Therefore, tests were conducted in a 20.6-m-long hydraulic scale model at heads up to 30 m, to improve the general understanding of aeration processes, to determine the governing parameters affecting air demand, and to formulate a new air demand design equation. The results show that air demand is mainly a function of the Froude number at the vena contracta. Furthermore, the new design equation enables quantifying the effects of the air vent loss coefficient, air vent size, tunnel slope, and tunnel length on air demand.
Permanent link
Publication status
published
Editor
Book title
Journal / series
Volume
146 (8)
Pages / Article No.
4020055
Publisher
American Society of Civil Engineers
Event
Edition / version
Methods
Software
Geographic location
Date collected
Date created
Subject
Organisational unit
03820 - Boes, Robert / Boes, Robert
Notes
Funding
163415 - Aeration and two-phase flow characteristics of bottom outlets (SNF)