Open access
Date
2017-10Type
- Journal Article
Abstract
The aeration of emulsions with tailored properties and structure is of widespread importance in processing of foods and cosmetics. This report addresses the micro-cellular foam formation of carbon dioxide-saturated oil-in-water emulsions triggered by the application of a controlled pressure drop. The experimental setup combines a stirred pressure vessel with a pressure cell-equipped rheometer and pneumatic expansion valves. This allows to systematically study the process of gas dissolution, bubble nucleation, and growth under defined pressure, temperature, and flow conditions. Investigations on the impact of relevant process parameters show that dissolved gas fraction, emulsion viscosity, and shear rate have a major influence on foam formation. Dissolution of carbon dioxide leads to a viscosity reduction of the emulsion which and is described by a viscosity reduction factor. The point of bubble nucleation is derived from rheological patterns during depressurization. Experiments show that lower emulsion viscosity and higher shear rate favor bubble nucleation upon pressure release. Rheological results are supported by video analysis as the setup allows capturing nucleation, growth, and destabilization of bubbles as a function of pressure, supersaturation, and time. The results of this work yield the understanding of the high-pressure foaming mechanism from a rheological perspective and foster the design of such processes. Show more
Permanent link
https://doi.org/10.3929/ethz-b-000192621Publication status
publishedExternal links
Journal / series
Rheologica ActaVolume
Pages / Article No.
Publisher
SpringerSubject
Emulsion; High-pressure foaming; High-pressure rheology; Bubble nucleation; Carbon dioxide; SupersaturationOrganisational unit
03345 - Windhab, Erich Josef (emeritus) / Windhab, Erich Josef (emeritus)
Notes
It was possible to publish this article open access thanks to a Swiss National Licence with the publisher.More
Show all metadata