Search
Results
-
Simulation and comparison of different stirrer types inside a reverberation chamber
(2004)2004 International Symposium on Electromagnetic Compatibility (EMC)In this paper the simulation of various types of electromagnetic stirrers inside a reverberation chamber is presented. Several different stirrer designs and sizes are compared against each other, and the influence of the stirrer axis orientation (vertical versus horizontal) within the chamber is shown. Three-dimensional electrical field integral equation based method of moment full-wave simulations in the frequency domain are used for the ...Conference Paper -
Challenges and results of realistic reverberation chamber simulations and measurements
(2003)Proceedings of The 2003 Reverberation Chamber, Anechoic Chamber and OATS Users MeetingConference Paper -
Comparison of various reverberation chamber geometries and excitations using a frequency domain method of moments simulation
(2004)Proceedings 17th International Wroclaw Symposium and Exhibition on Electromagnetic CompatibilityConference Paper -
Full field calculation of a 1-18 GHz broadband ridged horn antenna
(2003)Proceedings ot the 2001 URSI International Symposium on Electromagnetic TheoryConference Paper -
Cubic and corrugated reverberation chambers
(2005)Electromagnetic compatibility 2005 : 16th International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility, February 13-18, 2005 : Symposium DigestConference Paper -
Three-dimensional method of moments simulation of a reverberation chamber in the frequency domain
(2003)Electromagnetic compatibility 2003 / 15th International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility, February 18-20, 2003Conference Paper -
Full wave analysis and experimental verification of a broadband ridged horn antenna system with parabolic reflector
(2001)IEEE Antennas and Propagation Society International Symposium, 2001Conference Paper -
Introduction to reverberation chamber simulation
(2002)Proc. 2nd NPL FREEMET MeetingConference Paper -
Modeling and simulation of a canonical equipment under test inside a medium-sized reverberation chamber
(2004)EMC Europe 2004 : International Symposium on Electromagnetic Compatibility; September 6 - 10, 2004, Technische Universiteit, Eindhoven, the Netherlands ; Vol 2: Proceedings part 2Conference Paper -
On the validation of simulated fields in a reverberation chamber
(2003)Conference proceedingsConference Paper