Search
Results
-
Measurement and simulation of acceleration correlated position errors in machine tools
(2013)Laser Metrology and Machine Performance XConference Paper -
Simulation and realization of a focus shifting unit using a tunable lens for 3D laser material processing
(2013)Physics Procedia ~ Lasers in Manufacturing (LiM 2013)3D laser microprocessing using current market available technologies reveals itself to be a cost intensive and complex undertaking which is mostly due to the control architecture and use of moving components. Recent market appearance of electronically tunable lenses exhibiting NIR transmission, large aperture, high damage threshold and fast response times are available for laser based applications. Hence, enabling usage in the field of ...Conference Paper -
Influence of Oxidizing Gas on the Stability of Dry Electrical Discharge Machining Process
(2013)Procedia CIRP ~ Proceedings of the Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM)Conference Paper -
Flowability of SLS powders at elevated temperature
(2013)Traide fair and User's Conference for Rapid Technology: ProceedingsConference Paper -
Super-finished Surfaces using meso-micro EDM
(2013)Procedia CIRP ~ Proceedings of the Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM)A novel stochastic orbiting strategy combined with extremely low stray capacitance sinking EDM machine offers the capability to achieve super-finished surfaces (Ra <0.1 μm) without pre-polishing of the copper tool electrodes. Surface defects such as inhomogeneity, cracks, arc spots and black spots have been analysed and reduced, while improving material removal rate with lower tool wear. Super-finished surfaces thus generated have uniform ...Conference Paper -
Influence of Workpiece Circumferential Speed in Wire Electrical Discharge Machining
(2013)Procedia CIRP ~ Proceedings of the Seventeenth CIRP Conference on Electro Physical and Chemical Machining (ISEM)In Wire Electrical Discharge Machining (WEDM) a specific wire run-off speed is applied to compensate wear and avoid wire breakage. Since the workpiece generally stays stationary and short discharge durations are applied, the relative displacement between wire and workpiece during one single discharge is very small. In Wire Electrical Discharge Dressing (WEDD), however, the workpiece rotates at very high circumferential speeds, since ...Conference Paper -
Physical and phenomenological simulation models for the thermal compensation of rotary axes of machine tools
(2013)Proceedings of the 13th International Conference of the European Society for Precision Engineering and NanotechnologyConference Paper -
Energy Equivalent of Compressed Air Consumption in a Machine Tool Environment
(2013)Innovative solutions : Proceedings of the 11th Global Conference on Sustainable ManufacturingConference Paper -
EDM process analysis using high-speed imaging
(2013)Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology : May 27th-31st, 2013, Berlin, GermanyConference Paper -
Ultrakurzpulsbearbeitung von Hochleistungswerkstoffen
(2013)Laser in der Elektronikproduktion & Feinwerktechnik, Tagungsband des 16. Seminars LEF 2013Conference Paper